Listar QUI_Articles por título
-
Effect of type and amount of alumina as dopant over the densification and the electrical properties of zinc oxide ceramic electrodes
Elsevier (2021-02)Aluminum-doped zinc oxide (AZO) electrodes can be a good alternative to replace the expensive electrodes (Ti, ITO, FTO, etc.), which are used in the electrooxidation process to remove refractory and emergent contaminants ... -
Effects of composition and furnace temperature on (Ni, Co) (Cr, Al)2O4 pigments synthesized by solution combustion route
Wiley (2017-08)The effects of composition and furnace temperature on Ni1-ΨCoΨCr2−2ΨAl2ΨO4 (0≤Ψ≤1) pigments prepared by Solution Combustion Synthesis were studied. As-synthesized samples showed spinel-like spongy structure, very easy to ... -
Effects of water and CMA in mitigating industrial road dust resuspension
Elsevier (2016-04)Water spraying and/or chemical suppressants such as salts and polymers have been suggested to reduce road dust resuspension due to their capability to increase adhesion, and therefore the effective size and weight of ... -
Effect of slurry properties and operational conditions on the structure and properties of porcelain tile granules dried in an acoustic levitator
Elsevier (2012)Spray-drying is a unit operation highly important in many industrial applications. In this work, the influence of the drying conditions on the final grain properties has been investigated in single droplet experiments.Porcelain ... -
Efficient strategies for controlled release of nanoencapsulated phytohormones to improve plant stress tolerance
BMC (2023-05)Climate change due to diferent human activities is causing adverse environmental conditions and uncontrolled extreme weather events. These harsh conditions are directly afecting the crop areas, and consequently, their ... -
Eficiencia energética de fachadas ventiladas con baldosas cerámicas reflectantes al infrarrojo cercano
Consejo Superior de Investigaciones Científicas, CSIC: Instituto Eduardo Torroja (2016)La creciente concienciación social respecto a la construcción sostenible y el ahorro energético en edificios está conduciendo a prescriptores y usuarios finales a tomar en consideración nuevas soluciones constructivas. Sin ... -
Eficiência energética na fabricação de placas cerãmicas mediante a utilização de óleo térmico
APICER -(Associação Portuguesa das Indústrias de Cerâmica e de Cristalaria) (2014)O processo de fabricação de placas cerâmicas consome uma grande quantidade de energia, maioritariamente energia térmica, que se obtém da combustão de gás natural. O aumento do custo deste combustível, assim como a situação ... -
Electrochemical degradation of norfloxacin using BDD and new Sb-doped SnO2 ceramic anodes in an electrochemical reactor in the presence and absence of a cation-exchange membrane
Elsevier (2019)Electrochemical oxidation of Norfloxacin (NOR) in sodium sulphate media has been comparatively studied in an undivided and in a divided electrolytic cell both containing either a boron doped diamond (BDD) or a novel ... -
Electrochemical Degradation of Reactive Black 5 using two-different reactor configuration
Nature Research (2020)Novel Sb-doped SnO2 ceramic electrodes sintered at different temperatures, are applied to the degradation of Reactive Black 5 in both divided and undivided electrochemical reactors. In the undivided reactor the discoloration ... -
Electrokinetic and rheological properties of highly concentrated kaolin dispersions: Influence of particle volume fraction and dispersant concentration
Elsevier (2010)An industrial kaolin was selected and characterised. Different dispersions were prepared with solids volume fractions between φ{symbol} = 0.20 and φ{symbol} = 0.47 in the presence of sodium silicate (between X<sub>s</sub> ... -
Electrophoretic deposition of nanostructured TiO2/alginate and TiO2-bioactive glass/alginate composite coatings on stainless steel
Maney Publishing (2014-01)Two alginate (Alg) based composite coatings on stainless steel AISI 316L substrates, one containing titania nanoparticles (n-TiO2) and another one a mixture (50/50 wt-%) of n-TiO2 and bioactive glass (BG), intended for ... -
Electrophoretic deposition of nanostructured-TiO2/chitosan composite coatings on stainless steel
Royal Society of Chemistry (2013-03)Novel chitosan composite coatings containing titania nanoparticles (n-TiO2) for biomedical applications were developed by electrophoretic deposition (EPD) from ethanol–water suspensions. The optimal ethanol–water ratio was ... -
Electrophoretic deposition of ZnO/alginate and ZnO-bioactive glass/alginate composite coatings for antimicrobial applications
Elsevier (2015)Two organic/inorganic composite coatings based on alginate, as organic matrix, and zinc oxide nanoparticles (n-ZnO) with and without bioactive glass (BG), as inorganic components, intended for biomedical applications, were ... -
Encapsulation Reduces the Deleterious Effects of Salicylic Acid Treatments on Root Growth and Gravitropic Response
MDPI (2022-11-14)The role of salicylic acid (SA) on plant responses to biotic and abiotic stresses is well documented. However, the mechanism by which exogenous SA protects plants and its interactions with other phytohormones remains ... -
Energy saving in ceramic tile kilns: Cooling gas heat recovery
Elsevier (2014-04)A great quantity of thermal energy is consumed in ceramic tile manufacture, mainly in the firing stage. The most widely used facilities are roller kilns, fuelled by natural gas, in which more than 50% of the energy input ... -
Engineering and scaling-up ceramic tiles with humidity self-regulation functionality
Elsevier (2023-11)The humidity regulation in the interior spaces of buildings by means of passive solutions that do not require energy consumption is a topic of great interest due to the current needs for comfort and energy efficiency. This ... -
Engineering zirconia coating microstructures by using saccharides in aqueous suspension plasma spraying feedstocks
Elsevier (2020-10-15)This study aims to demonstrate the feasibility to develop columnar microstructures in zirconia coatings manufactured by suspension plasma spray, through the modification of the properties of the suspension feedstocks with ... -
Enhancing NiZn ferrite properties through microwave sintering: A comparative studyMejora de las propiedades de la ferrita de NiZn mediante sinterización por microondas: un estudio comparativo
Elsevier (2023-11-03)The structural, microstructural, morphological, and electromagnetic properties of a micro- and nanostructured nickel–zinc ferrite ((Cu0.12Ni0.23Zn0.65)Fe2O4) were studied after sintering between 900 and 1100 °C. The ... -
Environmental characterization of burnt coal gangue banks at Yangquan, Shanxi Province, China
Elsevier (2008)The environmental characteristics of coal gangue dumps in Yangquan (Shanxi Province, China) were investigated. The amounts of coal gangue are very high in this coal region given the large coal production. As a result, ... -
Environmental comparison of indoor floor coverings
Elsevier (2019)Appropriate selection of construction materials plays a major role in a building's sustainable profile. The studysets out a comparative life cycle assessment of indoorflooring systems of different nature. Theflooring ...