Buscar
Alumina-zirconia coatings obtained by suspension plasma spraying from highly concentrated aqueous suspensions
(Elsevier, 2016)
Suspension plasma spraying (SPS) deposition represents an innovative technique to produce coatings that exhibit improved properties. However, the key to obtain coatings with superior functional properties relies on the ...
Effect of secondary thermal treatment on crystallinity of spinel-type Co(Cr, Al)2O4 pigments synthesized by solution combustion route
(Elsevier, 2018-03)
The effect of a post-synthesis thermal treatment on CoCr2−2ΨAl2ΨO4 (0.0 ≤ Ψ ≤ 1.0) ceramic pigments synthesized by Solution Combustion Synthesis (SCS) has been studied. As-synthesized SCS pigments were treated at two ...
Organosilane-Based Coating of Quartz Species from the Traditional Ceramics Industry: Evidence of Hazard Reduction Using In Vitro and In Vivo Tests
(Oxford University Press, 2017)
The exposure to respirable crystalline silica (RCS), e.g. quartz, in industrial settings can induce silicosis and may cause tumours in chronic periods. Consequently, RCS in the form of quartz and cristobalite has been ...
Lessons from the COVID-19 air pollution decrease in Spain: Now what?
(2021)
We offer an overview of the COVID-19 -driven air quality changes across 11 metropolises in Spain with the focuson lessons learned on how continuing abating pollution. Trafficflow decreased by up to 80% during the lockdownand ...
Study of lithium carbonate as sintering aid for tin oxide densification trough experimental designs: Main variables and microstructure changes
(Elsevier, 2022)
Tin oxide is one of the most extensively studied semiconductor materials due to its broad
field of applications. On the one hand, its high conductivity and its corrosion resistance are
the most remarkable properties. ...
Effect of type and amount of alumina as dopant over the densification and the electrical properties of zinc oxide ceramic electrodes
(Elsevier, 2021-02)
Aluminum-doped zinc oxide (AZO) electrodes can be a good alternative to replace the expensive electrodes (Ti, ITO, FTO, etc.), which are used in the electrooxidation process to remove refractory and emergent contaminants ...
Anion transport through ceramic electrodialysis membranes made with hydrated cerium dioxide
(Wiley, 2017-05)
In this research, low-cost ceramic anion-exchange membranes have been developed from porous supports manufactured, using a chamotte as a pore former. An inorganic anion-exchanger (hydrated cerium dioxide) has been deposited ...
Processing–microstructure–properties relationship in a CuNiZn ferrite
(Elsevier, 2018)
CuNiZn ferrites are polycrystalline ceramic materials that are used widely in electronic devices for a number of reasons, including their high permeability in the RF frequency region, electrical resistivity, mechanical ...
Influence of the reactor configuration and the supporting electrolyte concentration on the electrochemical oxidation of Atenolol using BDD and SnO2 ceramic electrodes
(Elsevier, 2020)
Electrochemical oxidation of β-blocker atenolol (ATL, 100 ppm) at different
applied current densities (33, 50 and 83 mA·cm-2) using a reactor divided by an
ion-exchange membrane and an undivided one was investigated. Two ...
Solution combustion synthesis of (Ni,Fe)Cr2O4 pigments: Effect of post-synthesis thermal treatments
(Elsevier, 2017-10-15)
Mixed spinel pigments Ni1− ΨFeΨCr2O4 (0 ≤ Ψ ≤ 1) were synthesized by means of a method known as Solution Combustion Synthesis, using urea as fuel. Effects on mineralogy, microstructure and colouring power of composition ...