ListarITC_Articles por tema "sintering"
Mostrando ítems 1-7 de 7
-
CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes
American Ceramic Society (2018-12)Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants ... -
Effect of particle size distribution on the sinter-crystallisation kinetics of a SiO2-Al2O3-CaO-MgO-SrO glass-ceramic glaze
Elsevier (2020-05-20)Sinter-crystallisation kinetics of a glaze with an average particle size of 9.6µm, 4.0µm and 0.65µm, which devitrified anorthoclase and diopside, were studied by non-isothermal techniques. It was confirmed that the ... -
Effect of pore generator on microstructure and resistivity of Sb(2)O(3)and CuO doped SnO(2)electrodes
Springer (2020-08-08)Sb2O3 and CuO doped SnO2 ceramic electrodes could be an alternative to the ones currently used ones in the electrooxidation process of water pollutants. The rise of electrode surface by introducing a porogen agent on the ... -
Effect of type and amount of alumina as dopant over the densification and the electrical properties of zinc oxide ceramic electrodes
Elsevier (2021-02)Aluminum-doped zinc oxide (AZO) electrodes can be a good alternative to replace the expensive electrodes (Ti, ITO, FTO, etc.), which are used in the electrooxidation process to remove refractory and emergent contaminants ... -
Kinetics of the transformations occurring during the firing process of an industrial spray-dried porcelain stoneware body
Elsevier (2022-03-08)Pressed compacts of an industrial spray-dried porcelain stoneware powder, consisting mainly of albite, quartz, kaolinite, and illite, were thermally treated at different temperatures and times. Fired test piece bulk density ... -
Mechanical properties obtained by nanoindentation of sintered zircon-glass matrix composites
Elsevier (2020-01-10)This study was undertaken to determine the effect of zircon content and firing temperature on the hardness and indentation modulus of zircon–glass composites obtained by sintering. A standard non-devitrified borosilicate ... -
Study of lithium carbonate as sintering aid for tin oxide densification trough experimental designs: Main variables and microstructure changes
Elsevier (2022)Tin oxide is one of the most extensively studied semiconductor materials due to its broad field of applications. On the one hand, its high conductivity and its corrosion resistance are the most remarkable properties. ...