CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Sánchez-Rivera, María José; Giner Sanz, Juan José; Pérez-Herranz, Valentín; Mestre Beltrán, Sergio
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/176601
comunitat-uji-handle3:10234/176618
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processesAutoría
Fecha de publicación
2018-12Editor
American Ceramic SocietyCita bibliográfica
SÁNCHEZ‐RIVERA, María‐José, et al. CuO improved (Sn, Sb) O2 ceramic anodes for electrochemical advanced oxidation processes. International Journal of Applied Ceramic Technology. 2018; 1 – 12Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://ceramics.onlinelibrary.wiley.com/doi/full/10.1111/ijac.13149Versión
info:eu-repo/semantics/submittedVersionPalabras clave / Materias
Resumen
Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic ... [+]
Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants in wastewaters. The CuO proportion has been optimized to obtain densified electrodes with a mild thermal cycle (Tmax = 1200°C). One of the manufactured electrodes (97.8 mol.% of SnO2, 1.0 mol.% of Sb2O3, and 1.2 mol.% of CuO) was selected for electrochemical characterization from a physical and morphological analysis. The electrochemical behavior of the selected electrode showed that the addition of CuO as sintering aid widens the electrochemical window and increases the electrode “inactivity”, with respect to an (Sn, Sb)O2 electrode synthesized in the same conditions. In return, the (Sn,Sb,Cu)O2 electrode presents a significantly lower electrochemical rugosity factor. Moreover, the addition of CuO does not change the oxygen evolution reaction mechanism, but it modifies the kinetic parameters, leading to a larger accumulation of hydroxyl radicals. Consequently, the addition of CuO as sintering aid significantly improves the electrochemical properties of the electrode as an electrochemical advanced oxidation process anode with respect to the (Sn,Sb)O2 electrode, at the expense of worsening its electrochemical roughness factor. The results of the electrochemical characterization were confirmed by Norfloxacin degradation tests. [-]
Proyecto de investigación
Ministerio de Economía y Competitividad (CTQ2015- 65202-C2-1-R and CTQ2015-65202-C2-2-R)Derechos de acceso
© 2018 The American Ceramic Society
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- QUI_Articles [296]
- ITC_Articles [74]