Buscar
Oxynitride glasses: a review
(ElsevierSociedad Española de Cerámica y Vidrio, 2016)
Oxynitride glasses are special types of silicates or silicoaluminates which have been the object of many studies over the last forty years. They can be prepared by means of various complex methods, leading to variable ...
Thermal behaviour of multilayer and functionally-graded YSZ/Gd2Zr2O7 coatings
(Elsevier, 2017)
Zirconates with pyrochlore structure, such as Gd2Zr2O7, are new promising thermal barrier coatings because of their very low thermal conductivity and good chemical resistance against molten salts. However, their coefficient ...
Analysis of bending strength of porous titanium processed by space holder method
(Maney on behalf of the Institute of Materials, Minerals and Nining, 2011-02)
Porous titanium specimens have been produced by means of the space holder method. Titanium grade 3 (TiCP3) has been used as material and ammonium bicarbonate as spacer. Process parameters (compaction pressure, metal grain ...
Ceria-doped scandia-stabilized zirconia (10Sc2O3·1CeO2·89ZrO2) as electrolyte for SOFCs: Sintering and ionic conductivity of thin, flat sheets
(WileyThe American Ceramic Society, 2017-03)
In this study, thin, flat sheets, about 90 μm thick, were prepared from ceria-doped scandia-stabilized zirconia with molecular formula 10Sc2O3·1CeO2·89 ZrO2 (10Sc1CeSZ) by tape casting and subsequent sintering at different ...
Caracterización mecánica y tribológica de recubrimientos diamond-like carbon aplicados por la técnica deposición química de vapor sobre baldosas cerámicas
(Elsevier, 2015)
Modifying ceramic tile functionality in order to improve their performance is a continuous challenge for ceramic industry. One technique emerging as an alternative in the ceramic products is the use of advanced thin coatings ...
Bioactive glass suspensions preparation for suspension plasma spraying
(Elsevier, 2016-06)
A bioactive glass was dry-milled and sieved in order to obtain powders with particle size finer than 63 μm. Two suspensions, with different particle size distribution (D50 = 8.3 μm and D50 = 2.2 μm), were subsequently ...
Improvement of the Electrochemical Behavior of (Sb, Sn, Cu)O Ceramic Electrodes as Electrochemical Advanced Oxidation Anodes
(Wiley, 2019-05-02)
This work explores the possibility of increasing the active surface of a Sb‐doped SnO2 ceramic electrode using CuO as sintering aid, by incorporating petroleum coke as a pore generator. In order to fulfil this goal, three ...
Improvement in Char Strength with an Open Cage Silsesquioxane Flame Retardant
(MDPI, 2017)
Different characterization techniques were used to study the hydrolysis and condensation
reaction kinetics of 3-methacryloxypropyltrimethoxysilane (MAPTMS) to obtain open cage
silsesquioxane oligomers. The formation of ...
Channeled PM10, PM2.5 and PM1 Emission Factors Associated with the Ceramic Process and Abatement Technologies
(MDPI, 2022-08-05)
A sampling methodology and a mathematical data treatment were developed that enable to determine not only total suspended particulates (TSP) emitted at channeled sources but also the PM10, PM2.5, and PM1 mass fractions ...
Comparison of porosity assessment techniquesfor low-cost ceramic membranes
(Sociedad Española de Cerámica y Vidrio, 2017-01)
En el presente trabajo se han caracterizado mediante diferentes métodos membranas cerámicas de bajo coste desarrolladas para tratar aguas residuales en reactores biológicos de membrana (MBR) o mediante tratamientos terciarios. ...