Buscar
Viabilidad de la implantación de sistemas de cerramiento total para reducir las emisiones difusas de partículas
(Sociedad Española de Cerámica y Vidrio, 2012-11)
Following the entry into force of the IPPC directive, the activities that it affects, which include the ceramic sector, have needed
to control fugitive particle emissions by implementing corrective measures that often ...
Decoração Cerâmica com Tecnologias de Jato de Tinta (Inkjet)
(Associação Brasileira de Cerâmica, 2012-01)
Este artículo presenta una visión general de la tecnología de chorro de tinta de impresión digital aplicada al sector de la cerámica. Presenta un histórico de las principales tecnologías de inyección de tinta actualmente ...
New model to tune the dielectric properties of dense and half-dense sintered polycrystalline cu-doped Ni–Zn ferrite
(ElsevierEuropean Ceramic Society, 2021-11-30)
Sintered polycrystalline Cu-doped Ni–Zn ferrite specimens have been successfully prepared by a conventional ceramic method using different pressure-temperature-time cycles. The studied samples, with an average grain size ...
Drivers of divergent trends in tropospheric ozone hotspots in Spain, 2008–2019
(Springer, 2023)
This study aimed to investigate the causes of contrasting ozone (O3) trends in Spanish O3 hotspots between 2008 and 2019, as documented in recent studies. The analysis involved data on key O3 precursors, such as nitrogen ...
Use of nanofiltration membrane technology for ceramic industry wastewater treatment
(Sociedad Española de Cerámica y Vidrio, 2012-03)
A study has been undertaken of an advanced wastewater treatment approach using polymer nanofiltration membranes, in
an attempt to obtain water of sufficient quality to allow it to be reused in the same production process ...
In vitro toxicity of industrially relevant engineered nanoparticles in human alveolar epithelial cells: air–liquid interface versus submerged cultures
(MDPI, 2021-11-27)
Diverse industries have already incorporated within their production processes engineered nanoparticles (ENP), increasing the potential risk of worker inhalation exposure. In vitro models have been widely used to investigate ...
ZrSiO4/ZrO2 thermal barrier coatings produced by suspension plasma spraying
(Elsevier, 2024-01-01)
Zircon has excellent thermal properties that make it a good candidate for thermal barrier coatings. Although it suffers decomposition at high temperature, significant amounts of zircon phase can be retained in the coatings ...
Introducing an ionic conductive matrix to the cold-sintered Li1.3Al0.3Ti1.7(PO4)3-based composite solid electrolyte to enhance the electrical properties
(Elsevier, 2023-08-09)
In the present work, a Polymer-In-Ceramics (PIC) solid electrolyte based on Li1.3Al0.3Ti1.7(PO4)3 (LATP) and PEOn-LiTFSI (poly(ethylene oxide) - lithium bis(trifluoromethanesulfonyl)imide) is obtained via Cold Sintering ...
Determination of the packing fraction of silica naoparticles from the rheological and viscoelastic measurements of nanofluids
(elsevier, 2012-10)
Nanofluids have become of great interest due to the excellent properties and reduced size of nanoparticles making them useful for different applications. The agglomeration of nanoparticles depends on the interparticle ...
M.A.B. Revestimientos vítreos con propiedades bactericidas y fungicidas
(2013-04-11)
This report describes the mosaic M.A.B. (bactericide and fungicide) produced by Togama S.A. belonging to the group Fluidra
S.A., which has been awarded with the Silver Alfa Award by the Spanish Society of Ceramics and ...