Buscar
Dispersion of TiO2nanopowders to obtain homogeneous nanostructured granules by spray-drying
(Elsevier, 2011)
This work deals with the dispersion and stabilisation of nanosized TiO2 particles in an aqueous medium as a first step in the preparation of spray-dried nanostructured powders.
A colloidal route leading to the production ...
Lightweight Porcelain Stoneware by Engineered CeO2 Addition
(Wiley, 2010)
The use of porcelain stoneware in innovative applications such as the covering of internal walls or the manufacturing of ventilated facades may be limited by its relatively high density. In this paper, we discuss the ...
Mosaico Vítreo Retrorreflectante
(Sociedad Española de Cerámica y Vidrio, 2012-03)
Salquisa and Alttoglass have developed a very innovative product : the retro reflective glass mosaic. This new product can
be used in both horizontal and vertical signposting and also in interior design and architecture.
This ...
Relationship between Young's modulus and temperature in porcelain tiles
(Elsevier, 2012)
A focused research was conducted on samples prepared from an industrial porcelain tile composition containing quartz, used to produce ceramic floor tiles, with the aim of evaluating the variation of fired specimens’ Young's ...
Determination of Carbon, Hydrogen, Nitrogen and Sulfur in Geological Materials Using Elemental Analysers
(Wiley, 2012)
This article describes a series of methods developed for the determination of total carbon (CTotal), organic carbon (Corg), hydrogen, nitrogen and sulfur. The following elemental analysers were used: LECO model RC-412 for ...
Estudio del efecto fotocrómico que presentan los vidriados opacificados por esfena
(Sociedad Española de Cerámica y Vidrio, 2012-03)
White glazes opacified by sphene, based on the system SiO2-CaO-TiO2, are an alternative to the glazes in which the opacifying
phase is zircon. However, it has been observed that this type of glaze displays photochromism ...
Environmental development of the Spanish ceramic tile manufacturing sector over the period 1992–2007
(Sociedad Española de Cerámica y Vidrio, 2012-03)
The Spanish tile manufacturing sector has grown steadily over the years covered by the three benchmark studies, carried out
in 1992, 2001, and 2007, from which data are compared in this paper. In that period, production ...
Optimización energética en la fabricación de baldosas cerámicas mediante el uso de aceite térmico
(Sociedad Española de Cerámica y Vidrio, 2012-07)
The ceramic tile manufacturing process consumes a great amount of energy, mainly thermal energy, which is obtained from
natural gas combustion. The increased cost of this fuel and the current economic situation make cost ...
Use of nanofiltration membrane technology for ceramic industry wastewater treatment
(Sociedad Española de Cerámica y Vidrio, 2012-03)
A study has been undertaken of an advanced wastewater treatment approach using polymer nanofiltration membranes, in
an attempt to obtain water of sufficient quality to allow it to be reused in the same production process ...
Influence of composition on mechanical behaviour of porcelain tile. Part I: microstructural characterization and developed phases after firing
(Elsevier, 2010-03)
The porcelain tile is a ceramic product with high technical and aesthetic performance, whose composition is formulated from a mixture of clay or kaolin, quartz and feldspar. This paper is the first part of a study focusing ...