Buscar
Study of the rheological behaviour of monomodal quartz particle beds under stress: a model for the shear yield functions of powders
(Elsevier, 2011-09-15)
A model is proposed that describes the yield locus of powders. The model is based on the adhesive contact of elastic spheres theory developed by Johnson, Kendall, and Roberts (JKR model). The proposed model improves the ...
Influence of composition on mechanical behaviour of porcelain tile. Part II: mechanical properties and microscopic residual stress
(Elsevier, 2010-03)
The influence of the starting composition on the mechanical properties of sintered porcelain tile was evaluated based on the linear elastic fracture mechanics. Tile compositions were prepared according to a simplex-centroid ...
Decoração Cerâmica com Tecnologias de Jato de Tinta (Inkjet)
(Associação Brasileira de Cerâmica, 2012-01)
Este artículo presenta una visión general de la tecnología de chorro de tinta de impresión digital aplicada al sector de la cerámica. Presenta un histórico de las principales tecnologías de inyección de tinta actualmente ...
Cleaner production of porcelain tile powders. Fired compact properties
(Elsevier, 2012-03)
A new ceramic powder preparation process, the droplet-powder granulation process (DPGP), was recently proposed for the cleaner production of ceramic tiles. The DPGP granules and resulting pressed compacts were characterized ...
Preparation of porcelain tile granulates by more environmentally sustainable processes
(Sociedad Española de Cerámica y Vidrio, 2012-03)
This study examines the feasibility of manufacturing glazed porcelain tiles with a more environmentally friendly
manufacturing process, by reducing water and thermal energy consumption. The process studied in this paper ...
Shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. Proposed structural model.
(Elsevier, 2015-09)
A structural model was developed to describe the shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. The model is based on the following main assumptions: the particles are distributed in ...
Comportamiento a fatiga térmica de la capa de anclaje de nuevas barreras térmicas cerámicas obtenidas mediante proyección por plasma atmosférico
(Universidad Pedágogica y Tecnológica de Colombia (UPTC), 2016-05)
The development of new ceramic materials to protect the metallic components against corrosion and oxidation at
high temperature, also known as thermal barriers coating (TBC), is of a great interest topic for many industrial ...
On the source inversion of fugitive surface layer releases. Part I. Model formulation and application to simple sources
(Elsevier, 2015-05)
Source inversion by dispersion modelling of fugitive particulate matter (PM) emissions entails considerable difficulty. Fugitive PM sources are rarely steady or point sources. They occur near the ground, where there are ...
Estimation of the heat of reaction in traditional ceramic compositions
(Elsevier, 2015-05)
Most energy studies on the traditional ceramic manufacturing process focus on the firing stage because this is the process stage that consumes the greatest amount of thermal energy. At present in Europe, using typical ...
Unwanted effects of European Union environmental policy to promote a post-carbon industry. The case of energy in the European ceramic tile sector
(Elsevier, 2016-03-20)
Global warming combined with low carbon transition plans is threatening the future of high energy consumption industry sectors in the European Union (EU). The need to respond to environmental challenges is demonstrated by ...