Buscar
Evaluation of new ceramic electrodes based on Sb-doped SnO2 for the removal of emerging compounds present in wastewater
(Elsevier, 2018-02-01)
The properties of the ceramic electrodes make them interesting for electrochemical advanced oxidation processes (EAOPs), destined to the elimination of emergent or refractory contaminants, as an alternative to boron-doped-diamond ...
Solution precursor plasma spraying (SPPS): a novel and simple process to obtain bioactive glass coatings
(Elsevier, 2018)
This research addresses the use of an emerging plasma spray technique known as SPPS (Solution
Precursor Plasma Spraying) to obtain bioactive glass coatings. In SPPS, the feedstock is a sol precursor of
the bioactive glass ...
Molten salt attack on multilayer and functionally-graded YSZ coatings
(Elsevier, 2018-08-01)
Thermal barrier coatings have been extensively studied in the last years in order to increase the operational temperature of the current gas turbines as well as to improve the coating lifetime. Many coating characteristics ...
Non-isothermal sinter-crystallisation of satin glazes: A kinetic model
(Elsevier, 2018-05)
Many materials of a glass-ceramic nature are obtained by glass particle sinter-crystallisation, whose process kinetics have been studied very little. The present study analyses the physico-chemical transformations that ...
Experimental design applied to improving the effect of bismuth oxide as a sintering aid for tin oxide
(Elsevier, 2018)
Tin oxide has been extensively studied due to its wide variety of applications. However, its poor sinter ability requires the use of sintering aids for its processing. The sintering behaviour of three different SnO2-based ...
Anion transport through ceramic electrodialysis membranes made with hydrated cerium dioxide
(Wiley, 2017-05)
In this research, low-cost ceramic anion-exchange membranes have been developed from porous supports manufactured, using a chamotte as a pore former. An inorganic anion-exchanger (hydrated cerium dioxide) has been deposited ...
Processing–microstructure–properties relationship in a CuNiZn ferrite
(Elsevier, 2018)
CuNiZn ferrites are polycrystalline ceramic materials that are used widely in electronic devices for a number of reasons, including their high permeability in the RF frequency region, electrical resistivity, mechanical ...
Compositional effects on the crosslink density of Ca–(Mg)–(Y)–Si–Al–oxyfluoronitride glasses
(Wiley, 2017-09)
The effects of fluorine and nitrogen substitution for oxygen in aluminosilicate glasses, effectively oxyfluoronitride (OFN) glasses, modified by calcium, calcium–yttrium or calcium–magnesium on thermal and physical/mechanical ...
Effect of fluorine and nitrogen content on the properties of Ca-Mg-Si-Al-O-(N)-(F) glasses
(Elsevier, 2017)
X-ray amorphous glasses of composition (in equivalent percent) 15Ca:15Mg: 55Si:15Al:(100-x-y)O:xN:yF with x=0, 10, 15 and y=0, 1, 3, 5, were prepared by melting and casting. The effects of oxygen substitution by fluorine ...
Fuel effect on solution combustion synthesis of Co(Cr,Al)2O4 pigments
(Elsevier, 2017-10)
The fuel effect on the synthesis of a ceramic pigment with a composition CoCr2−2ΨAl2ΨO4 (0 ≤ Ψ ≤ 1) by means of solution combustion synthesis process (SCS) has been studied. Three different fuels were selected to carry out ...