Listar QUI_Articles por título
-
M.A.B. Revestimientos vítreos con propiedades bactericidas y fungicidas
(2013-04-11)This report describes the mosaic M.A.B. (bactericide and fungicide) produced by Togama S.A. belonging to the group Fluidra S.A., which has been awarded with the Silver Alfa Award by the Spanish Society of Ceramics and ... -
Magnetic complex permeability (imaginary part) dependence on the microstructure of a Cu-doped Ni–Zn-polycrystalline sintered ferrite
Elsevier (2020-07)In this study, the effective complex magnetic permeability-imaginary part of a Cu doped-NiZn polycrystalline ferrite used as EMI suppressor has been quantitatively related to microstructural parameters. It has been observed ... -
Magnetic Photocatalyst for Wastewater Tertiary Treatment at Pilot Plant Scale: Disinfection and Enrofloxacin Abatement
MDPI (2021-01)In this work, we have tested a photocatalytic material consisting of a core of SiO2/Fe3O4 coated with TiO2 (Magnox) for plausible tertiary wastewater treatment. For this, a pilot plant of 45 L equipped with an Ultraviolet ... -
Mechanical properties obtained by nanoindentation of sintered zircon-glass matrix composites
Elsevier (2020-01-10)This study was undertaken to determine the effect of zircon content and firing temperature on the hardness and indentation modulus of zircon–glass composites obtained by sintering. A standard non-devitrified borosilicate ... -
Mechanical properties of double-layer and graded composite coatings of YSZ obtained by atmospheric plasma spraying
Springer Verlag (2016)Double-layer and graded composite coatings of yttria-stabilized zirconia were sprayed on metallic substrates by atmospheric plasma spray. The coating architecture was built up by combining two different feedstocks: one ... -
Mejora de la eficiencia energética en la fabricación de cerámica estructural
Pública (2011)El proceso de fabricación de materiales cerámicos de construcción de arcilla cocida (también denominada cerámica estructural) es intensivo el consumo de energía térmica, que se consume principalmente durante las etapas de ... -
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
Elsevier (2018-12-20)The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ... -
Microstructure and indentation mechanical properties of YSZ nanostructured coatings obtained by suspension plasma spraying
Elsevier (2013-04)A commercial nanosuspension of yttria-stabilised zirconia (YSZ) was successfully deposited on austenitic stainless steel substrate by suspension plasma spraying technique (SPS). A SG-100 torch with internal radial injection ... -
Microstructure and mechanical properties of plasma spraying coatings from YSZ feedstocks comprising nano-and submicron-sized particles
Elsevier (2015-04)Atmospheric plasma spraying (APS) is an attractive technique to obtain nanostructured coatings due to its versatility, simplicity and relatively low cost. However, nanoparticles cannot be fed into the plasma using conventional ... -
Microstructure and photocatalytic activity of APS coatings obtained from different TIO2 nanopowders
Elsevier (2013-04)In recent years, intense research has shown that thermal spray techniques, especially atmospheric plasma spraying (APS), can be used to obtain nanostructured TiO2 coatings with effective photocatalytic activity. This ... -
Microstructure and photocatalytic activity of suspension plasma sprayed TiO2 coatings on steel and glass substrates
Elsevier (2011-10-25)In this study, TiO2 coatings were deposited by suspension plasma spraying (SPS) from a commercial TiO2 nanoparticle suspension on two different substrates: a standard stainless steel and a Pyrex glass. Coatings were sprayed ... -
Microstructure-dependent magnetic permeability in ferrites from nanoparticles
Elsevier (2023-04-03)Ferrite samples of composition Cu0.12Ni0.23Zn0.65(Fe2O4) have been prepared by a conventional ceramic process using different sintering temperatures and dwell times. The average particle size is around 25–30 nm and, after ... -
Modeling microstructural damage of silicate-based ceramics and its influence on macroscopic fracture strength
Elsevier (2014-05-15)The aim of this work is to clarify the influence of quartz inclusions added to a vitreous matrix on the macroscopic fracture toughness (KICKIC). We use numerical simulations to model a silicate-based ceramic material as a ... -
Modeling of Drying Curves of Silica Nanofluid Droplets Dried in an Acoustic Levitator Using the Reaction Engineering Approach (REA) Model
Taylor & Francis (2013)The use of nanoparticles has become of great interest in different industrial applications. The spray drying of nanofluids forms nanostructured grains, preserving the nanoparticle properties. In this work, individual ... -
Modelización mecánica del enfriamiento rápido en sistemas tipo gres porcelánico
Sociedad Española de Cerámica y Vidrio (2012-03)This paper analyses the effect of cooling on mechanical behaviour, in particular, on the residual stresses that appear when materials of the porcelain tile type are involved. However, these compositions have a very complex ... -
Modelling the Influence of Manufacturing Process Variables on Dimensional Changes of Porcelain Tiles
Hindawi (2013-09)A model to study the influence of main process variables (powder moisture, maximum compaction pressure, and maximum firing temperature) on the intermediate variables (mass, dry bulk density, size, and thickness) and the ... -
Modification of the properties of Al2O3/TZ-3YS thermal barrier coating by the addition of silicon carbide particles and fructose
MDPI (2021-03-29)Al2O3/TZ-3YS coatings developed by suspension plasma spraying were studied in the present work. Mechanical and thermal characterization was realized to evaluate the suitability of thermal barrier coatings. In addition, ... -
Molten salt attack on multilayer and functionally-graded YSZ coatings
Elsevier (2018-08-01)Thermal barrier coatings have been extensively studied in the last years in order to increase the operational temperature of the current gas turbines as well as to improve the coating lifetime. Many coating characteristics ... -
Monitoring and possible reduction of HF in stack flue gases from ceramic tiles
Elsevier (2010)HF (hydrogen fluoride) emission control is one of the critical environmental parameters in the firing of ceramic materials at peak temperatures higher than 1000 °C. In this study, in-stack concentrations of HF were monitored ... -
Mosaico Vítreo Retrorreflectante
Sociedad Española de Cerámica y Vidrio (2012-03)Salquisa and Alttoglass have developed a very innovative product : the retro reflective glass mosaic. This new product can be used in both horizontal and vertical signposting and also in interior design and architecture. This ...