Listar QUI_Articles por título
-
Hardness and Young's modulus distributions in atmospheric plasmas prayed WC–Co coatings using nanoindentation
Elsevier (2011-05-25)A statistical indentation analysis of WC–Co coatings obtained by atmospheric plasma spray (APS) with two secondary plasma gases, H2 and He, was investigated using an instrumented indentation technique with the aim of ... -
Health risk assessment from exposure to particles during packing in working environments
Elsevier (2019-06-25)Packing of raw materials in work environments is a known source of potential health impacts (respiratory, cardiovascular) due to exposure to airborne particles. This activity was selected to test different exposure and ... -
Impact of Feedstock Nature on Thermal Conductivity of YSZ Thermal Barrier Coatings Obtained by Plasma Spraying
Göller Verlag GmbH (2016-09)Yttria-stabilized zirconia (YSZ) coatings with low thermal conductivity were obtained using three different particle size distributions as starting powder: nano-, submicron- and bimodal submicron/nano-sized particles. On ... -
Impact of fugitive emissions in ambient PM levels and composition. A case study in Southeast Spain
Elsevier (2010)The results of this study show the high impact that anthropogenic fugitive emissions of mineral dust have on air quality (levels of PM<sub>10</sub>, PM<sub>2.5</sub> and some metals) in a region in SE Spain named L'Alacantí. ... -
Impactos ambientales del ciclo de vida de las baldosas cerámicas. Análisis sectorial, identificación de estrategias de mejora y comunicación (II)
Reed Business Information (2011)El artículo analiza el potencial impacto ambiental que generan las baldosas cerámicas mediante un Análisis de Ciclo de Vida (ACV) a nivel sectorial, en el que participaron más de 50 empresas españolas. Los resultados han ... -
Impactos ambientales del ciclo de vida de las baldosas cerámicas: análisis sectorial, identificación de estrategias de mejora y comunicación (I)
Reed Business Information (2011)El artículo analiza el impacto ambiental que generan las baldosas cerámicas mediante el Análisis de Ciclo de Vida (AC) a nivel sectorial en el que participaron más de 50 empresas españolas. Los resultados han servido ... -
Improvement in Char Strength with an Open Cage Silsesquioxane Flame Retardant
MDPI (2017)Different characterization techniques were used to study the hydrolysis and condensation reaction kinetics of 3-methacryloxypropyltrimethoxysilane (MAPTMS) to obtain open cage silsesquioxane oligomers. The formation of ... -
Improvement of salicylic acid biological effect through its encapsulation with silica or chitosan
Elsevier B.V. (2021-12-30)Attacks of necrotrophic and biotrophic fungi affect a large number of crops worldwide and are difficult to control with fungicides due to their genetic plasticity. Encapsulation technology is a good alternative for ... -
Improvement of the Electrochemical Behavior of (Sb, Sn, Cu)O Ceramic Electrodes as Electrochemical Advanced Oxidation Anodes
Wiley (2019-05-02)This work explores the possibility of increasing the active surface of a Sb‐doped SnO2 ceramic electrode using CuO as sintering aid, by incorporating petroleum coke as a pore generator. In order to fulfil this goal, three ... -
Improvement of the mechanical and aesthetic properties of a coating by inkjet technology
Wiley (2021-01-11)Different amounts of ink, made up almost entirely of a frit that devitrified abundant small crystals of anorthoclase, were applied by inkjet printing onto a traditional unfired glaze substrate. The rheological properties ... -
In operando characterization of the ionic conductivity dependence on liquid transient phase and microstructure of cold-sintered Bi2O3-doped Li1.3Al0.3Ti1.7(PO4)3 solid-state electrolyte
Elsevier (2023-08-31)A disruptive sintering technique, Cold Sintering Process (CSP), has been used to produce cold-sintered samples of Bi2O3-doped Li1.3Al0.3Ti1.7(PO4)3 (LATP) as solid-state electrolyte (SSE). An in operando impedance study ... -
In vitro study of bioactive glass coatings obtained by atmospheric plasma spraying
Elsevier (2022-02)This research has addressed a complete study of the bioactivity of bioactive glass coatings obtained by atmospheric plasma spraying. The coatings have been characterized in terms of microstructure, adhesion, crystalline ... -
In vitro toxicity of industrially relevant engineered nanoparticles in human alveolar epithelial cells: air–liquid interface versus submerged cultures
MDPI (2021-11-27)Diverse industries have already incorporated within their production processes engineered nanoparticles (ENP), increasing the potential risk of worker inhalation exposure. In vitro models have been widely used to investigate ... -
Industry-scalable wall tile composition based on circular economy
Sociedad Española de Cerámica y Vidrio (2022-08)En el marco de la economía circular y la valorización de residuos, el presente trabajo aborda la posibilidad de fabricar azulejos cuyos soportes incluyan residuos en su formulación. Los residuos seleccionados son tiesto ... -
Influence of beta-to-alpha quartz transition on residual stresses of a feldspar glass matrix composite: A relationship with catastrophic fracture due to thermal shock
Elsevier (2023-04-14)A wide range of porcelain-based materials is composed of quartz crystalline particles dispersed in a homogeneous glassy phase. During the cooling stage these composites are subjected to stresses related to the transition ... -
Influence of composition on mechanical behaviour of porcelain tile. Part I: microstructural characterization and developed phases after firing
Elsevier (2010-03)The porcelain tile is a ceramic product with high technical and aesthetic performance, whose composition is formulated from a mixture of clay or kaolin, quartz and feldspar. This paper is the first part of a study focusing ... -
Influence of composition on mechanical behaviour of porcelain tile. Part II: mechanical properties and microscopic residual stress
Elsevier (2010-03)The influence of the starting composition on the mechanical properties of sintered porcelain tile was evaluated based on the linear elastic fracture mechanics. Tile compositions were prepared according to a simplex-centroid ... -
Influence of composition on mechanical behaviour of porcelain tile. Part III: Effect of the cooling rate of the firing cycle
Elsevier (2011)This paper is the third part of a study focusing on determining the influence of the porcelain tile composition on mechanical behaviour of sintered bodies. Tile compositions were prepared according to a simplex-centroid ... -
Influence of macroscopic residual stresses on the mechanical behavior and microstructure of porcelain tile
Elsevier (2008-09)The development of macroscopic residual stress, as in glass-tempering processes, was studied for porcelain tile. Mechanical strength was observed to increase less than might be theoretically expected, owing to deterioration ... -
Influence of microstructure and magnetizing mechanisms on magnetic complex permeability (imaginary part) of a Cu-doped Ni-Zn polycrystalline ferrite
Elsevier (2021)The complex permeability of the Cu-doped Ni–Zn polycrystalline ferrites is strongly dependent on microstructure, particularly on relative density (ϕ) and average grain size (G), as it has been shown in a previous ...