Browsing QUI_Articles by Title
-
Diffuse PM10emission factors associated with dust abatement technologies in the ceramic industry
Elsevier (2011-12)In this paper, an analytical methodology is proposed for estimating diffuse dust emissions from bulk solids managing (storage, handling, and transport) activities in the ceramic industry. The methodology is based on ... -
Digital light processing 3D printing of polymerizable ionic liquids towards carbon capture applications
Elsevier (2024)This study presents new 3D printable materials based on ad-hoc synthesized photocurable imidazolium ionic liquids (ILs) with bis(trifluoromethanesulfonyl)imide (NTf2)− as counterion and two different alkyl chain's structures ... -
Dispersion of mixtures of submicrometer and nanometre sized titanias to obtain porous bodies
Elsevier (2013-12)The stability and rheological behaviour of bimodal titania suspensions was studied. Bimodal mixtures were prepared by mixing nanosized TiO2 powders with an average primary size of ∼20–40 nm and surface area of ∼50 m2 g−1 ... -
Dispersion of TiO2nanopowders to obtain homogeneous nanostructured granules by spray-drying
Elsevier (2011)This work deals with the dispersion and stabilisation of nanosized TiO2 particles in an aqueous medium as a first step in the preparation of spray-dried nanostructured powders. A colloidal route leading to the production ... -
Drivers of divergent trends in tropospheric ozone hotspots in Spain, 2008–2019
Springer (2023)This study aimed to investigate the causes of contrasting ozone (O3) trends in Spanish O3 hotspots between 2008 and 2019, as documented in recent studies. The analysis involved data on key O3 precursors, such as nitrogen ... -
E-waste dismantling as a source of personal exposure and environmental release of fine and ultrafine particles
Elsevier (2022)Electronic waste (WEEE; from TV screens to electric toothbrushes) is one of the fastest growing waste streams in the world. Prior to recycling, e-waste components (metals, wood, glass, etc.) are processed by shredding, ... -
Efecto del procesado de materias primas sobre su poder de emisión de polvo
Elsevier (2017)En la manipulación y/o procesado de materiales pulverulentos en la industria cerámica, uno de los riesgos más importantes desde el punto de vista ambiental y de higiene laboral es la generación de polvo ambiental. En este ... -
Efecto del ZnO, ZrO2 y B2O3 en el proceso de clinkerización. Parte I. Reacciones de clinkerización y composición de los clínkeres.
CSIC (2008)El empleo de residuos cerámicos como materia prima alternativa en la fabricación del crudo de cemento Portland, aumenta el contenido de ZnO, ZrO2 y B2O3 en el clinker. Estos elementos se encuentran en la capa esmaltada ... -
Effect of average grain size and sintered relative density on the imaginary part – µ″ of the complex magnetic permeability of (Cu0.12Ni0.23Zn0.65)Fe2O4 system
Elsevier (2016)The influence of the sintered microstructure on the electromagnetic properties of Cu-doped NiZn ferrites were investigated. Two of the main variables of the thermal cycle have been modified: the maximum sintering temperature ... -
Effect of ceramic industrial particulate emission control on key components of ambient PM10
Elsevier (2009)The relationship between specific particulate emission control and ambient levels of some PM10 components (Zn, As, Pb, Cs, Tl) was evaluated. To this end, the industrial area of Castellón (Eastern Spain) was selected, where ... -
Effect of feedstock and plasma gun on the microstructure and bioactivity of plasma sprayed bioactive glass coatings
Elsevier (2021-01-25)Plasma–sprayed 45S5 bioactive glass coatings were manufactured using two types of powder feedstocks (commercial and lab–made 45S5 glass) and two plasma torches (single and triple cathode) to analyse their influence on ... -
Effect of fluorine and nitrogen content on the properties of Ca-Mg-Si-Al-O-(N)-(F) glasses
Elsevier (2017)X-ray amorphous glasses of composition (in equivalent percent) 15Ca:15Mg: 55Si:15Al:(100-x-y)O:xN:yF with x=0, 10, 15 and y=0, 1, 3, 5, were prepared by melting and casting. The effects of oxygen substitution by fluorine ... -
Effect of kaolin addition on the sinter-crystallisation kinetics of compacts of a crystallising frit
Elsevier (2022-08-22)Non-isothermal techniques were used to study the sintering and crystallisation kinetics of an anorthoclase- and diopside-devitrifying frit and mixtures of this frit with a commercial kaolin. Raising kaolin content was ... -
Effect of particle size distribution of suspension feedstock on the microstructure and mechanical properties of suspension plasma spraying YSZ coatings
Elsevier (2015-04)In this work, aqueous suspension feedstocks with different particle size distribution from submicron- and nano-sized YSZ powders were prepared. A previous colloidal characterisation allowed concentrated suspensions (~ 40 ... -
Effect of particle size distribution on the evolution of porous, microstructural, and dimensional characteristics during sinter-crystallisation of a glass-ceramic glaze
Elsevier (2021-08-05)Glass-ceramic test pieces, obtained from three different particle size distributions of a frit, were fired at temperatures between 800°C and 1200°C. Evolution of porous characteristics of the test pieces with firing ... -
Effect of particle size distribution on the sinter-crystallisation kinetics of a SiO2-Al2O3-CaO-MgO-SrO glass-ceramic glaze
Elsevier (2020-05-20)Sinter-crystallisation kinetics of a glaze with an average particle size of 9.6µm, 4.0µm and 0.65µm, which devitrified anorthoclase and diopside, were studied by non-isothermal techniques. It was confirmed that the ... -
Effect of particle size on processing of bioactive glass powder for atmospheric plasma spraying
Elsevier (2016)The work addresses the effect of the particle size of a bioactive glass feedstock on the processing and microstructure of the resulting coatings obtained by atmospheric plasma spraying (APS). It was observed that the ... -
Effect of pore generator on microstructure and resistivity of Sb(2)O(3)and CuO doped SnO(2)electrodes
Springer (2020-08-08)Sb2O3 and CuO doped SnO2 ceramic electrodes could be an alternative to the ones currently used ones in the electrooxidation process of water pollutants. The rise of electrode surface by introducing a porogen agent on the ... -
Effect of quartz particle size on the mechanical behaviour of porcelain tile subjected to different cooling rates
Elsevier (2009-04)Porcelain tile is a high-performance ceramic tile, in which quartz is a major compositional component. After the firing cycle, macroscopic residual stresses develop in the product as a result of rapid cooling. Further, ... -
Effect of secondary thermal treatment on crystallinity of spinel-type Co(Cr, Al)2O4 pigments synthesized by solution combustion route
Elsevier (2018-03)The effect of a post-synthesis thermal treatment on CoCr2−2ΨAl2ΨO4 (0.0 ≤ Ψ ≤ 1.0) ceramic pigments synthesized by Solution Combustion Synthesis (SCS) has been studied. As-synthesized SCS pigments were treated at two ...