Listar QUI_Articles por título
-
Molten salt attack on multilayer and functionally-graded YSZ coatings
Elsevier (2018-08-01)Thermal barrier coatings have been extensively studied in the last years in order to increase the operational temperature of the current gas turbines as well as to improve the coating lifetime. Many coating characteristics ... -
Monitoring and possible reduction of HF in stack flue gases from ceramic tiles
Elsevier (2010)HF (hydrogen fluoride) emission control is one of the critical environmental parameters in the firing of ceramic materials at peak temperatures higher than 1000 °C. In this study, in-stack concentrations of HF were monitored ... -
Mosaico Vítreo Retrorreflectante
Sociedad Española de Cerámica y Vidrio (2012-03)Salquisa and Alttoglass have developed a very innovative product : the retro reflective glass mosaic. This new product can be used in both horizontal and vertical signposting and also in interior design and architecture. This ...
-
Multi-step oxidative carboxylation of olefins with carbon dioxide by combining electrochemical and 3D-printed flow reactors
Royal Society of Chemistry (2023)The selective oxidation of alkenes to form epoxides followed by the cycloaddition of CO2 is a sustainable and cost-efficient method to generate functional cyclic carbonates. The use of a continuous-flow process allows ...
-
Multilayer and Particle Size-Graded YSZ Coatings Obtained by Plasma Spraying of Micro- and Nanostructured Feedstocks
Springer (2014)This study was undertaken to attempt to achieve a better balance between zirconia coating properties and high-temperature performance by combining the characteristics of coatings obtained from a micro- and a nanostructured ...
-
Nanobased coatings with improved NIR reflecting properties for building envelope materials: Development and natural aging effect measurement
Elsevier (2013-02)A significant contribution to the reduction of the Urban Heat Island effect and cooling energy demand is given today by the so called cool materials for the building envelope with enhanced reflecting and emitting properties. ...
-
Nanoindentation study of the mechanical and damage behaviour of suspension plasmasprayed TiO2 coatings
Elsevier (2012-01)TiO2 coatings can be used as self-cleaning surfaces owing to their photocatalytic and hydrophilic properties. Suspension plasma spray (SPS) has proven to be a feasible and cheap technique for producing self-cleaning surfaces ...
-
Nanoparticle exposure and hazard in the ceramic industry: an overview of potential sources, toxicity and health effects
Elsevier (2020-05)The ceramic industry is an industrial sector of great impact in the global economy that has been benefitting from advances in materials and processing technologies. Ceramic manufacturing has a strong potential for airborne ...
-
Nanostructured alumina from freeze-dried precursors
Wiley-Blackwell (2011)Nanocrystalline alumina has been obtained on the 100 g scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous solutions of different aluminum-containing products, namely aluminum acetate ...
-
New model to tune the dielectric properties of dense and half-dense sintered polycrystalline cu-doped Ni–Zn ferrite
Elsevier (2021-11-30)Sintered polycrystalline Cu-doped Ni–Zn ferrite specimens have been successfully prepared by a conventional ceramic method using different pressure-temperature-time cycles. The studied samples, with an average grain size ...
-
Non-destructive measurement of bulk density distribution in large-sized ceramic tiles
Elsevier (2010)An apparatus has been designed, built, and patented that is able, non-destructively, to determine bulk density distribution in large-sized ceramic tiles. The proposed method, based on the X-ray absorption technique, provides ...
-
Non-isothermal sinter-crystallisation of satin glazes: A kinetic model
Elsevier (2018-05)Many materials of a glass-ceramic nature are obtained by glass particle sinter-crystallisation, whose process kinetics have been studied very little. The present study analyses the physico-chemical transformations that ...
-
Non-isothermal sintering of powdered vitrified composites. A kinetic model
Elsevier (2019)This report sets out the results obtained on studying the sintering process of glass–zircon composites, analysing the microstructural changes that developed on modifying zircon content. The sintering of composites with ...
-
Novel Sb-doped SnO2 ceramic anode coated with a photoactive BiPO4 layer for the photoelectrochemical degradation of an emerging pollutant
Elsevier (2023-06-08)In the present work, a study about the electrochemical and photoelectrochemical degradation of an emerging pollutant using an Sb-doped SnO2 anode coated with a photocatalytic layer of BiPO4 has been performed. The ...
-
Nuevo equipo para medir la distribución de la densidad aparente de piezas cerámicas: DENSEXPLORER
Elsevier (2014-03)Este trabajo ha participado en la 38 edición de los premios Alfa de Oro, otorgados por la Sociedad Española de Cerámica y Vidrio, durante la Feria Internacional de Cerámica de Valencia CEVISAMA 2014 Densexplorer es el ...
-
Nuevo sistema para la medida y control de la presión máxima de prensado en los alvéolos del molde: ISOPRESS®
Sociedad Española de Cerámica y Vidrio (2012-03)The organization MACER, in collaboration with the Institute of Ceramic Technology, has developed the system ISOPRESS®, an integrated control device that permits to equal automatically the maximum pressure applied on the ...
-
O Processo de coloração a seco de porcelanato. Parte 1: Variáveis envolvidas e influência sobre as propriedades das peças
Associação Brasileira de Cerâmica (2008)Dentre as tipologias de revestimentos cerâmicos atualmente produzidos o porcelanato tem se destacado pela grande expansão em sua produção, observada nos últimos anos. O sucesso do produto se deve pelas propriedades técnicas ...
-
O Processo de coloração a seco de porcelanato. Parte 2: Variáveis envolvidas e influência
sobre as propriedades das peças
Associação Brasileira de Cerâmica (2008)Dentre as tipologias de revestimentos cerâmicos atualmente produzidos o porcelanato tem se destacado pela grande expansão em sua produção, observada nos últimos anos. O sucesso do produto se deve pelas propriedades técnicas ...
-
Obtainment of bactericidal inkjet inks based on Ag-nanocomposites
German Ceramic Society (2013)In this study, ceramic inks were formulated that are able to develop bactericidal properties and are appropriate for application by inkjet printing. These inks contain silver nanocomposites and are applied on to unfired ...
-
Obtainment of nanoparticulate CuNiZn ferrite powder by high-energy milling
The Ceramic Society of Japan (2012-08)This study was undertaken to obtain nanoparticulate CuNiZn ferrite powder by high-energy milling, as this is an approach that could potentially be scaled up for industrial use. Such nanometric particles may be expected to ...
