Buscar
Efecto del procesado de materias primas sobre su poder de emisión de polvo
(ElsevierSociedad Española de Cerámica y Vidrio, 2017)
En la manipulación y/o procesado de materiales pulverulentos en la industria cerámica, uno de los riesgos más importantes desde el punto de vista ambiental y de higiene laboral es la generación de polvo ambiental. En este ...
Fuel effect on solution combustion synthesis of Co(Cr,Al)2O4 pigments
(Elsevier, 2017-10)
The fuel effect on the synthesis of a ceramic pigment with a composition CoCr2−2ΨAl2ΨO4 (0 ≤ Ψ ≤ 1) by means of solution combustion synthesis process (SCS) has been studied. Three different fuels were selected to carry out ...
Influence of microstructure and magnetizing mechanisms on magnetic complex permeability (imaginary part) of a Cu-doped Ni-Zn polycrystalline ferrite
(Elsevier, 2021)
The complex permeability of the Cu-doped Ni–Zn polycrystalline ferrites is strongly dependent on microstructure, particularly on relative density (ϕ) and average grain size (G), as it has been shown in a previous ...
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
(Elsevier, 2018-12-20)
The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ...
CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes
(American Ceramic Society, 2018-12)
Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants ...
Evaluation of new ceramic electrodes based on Sb-doped SnO2 for the removal of emerging compounds present in wastewater
(Elsevier, 2018-02-01)
The properties of the ceramic electrodes make them interesting for electrochemical advanced oxidation processes (EAOPs), destined to the elimination of emergent or refractory contaminants, as an alternative to boron-doped-diamond ...
Aqueous suspension processing of multicomponent submicronic Y-TZP/Al2O3/SiC particles for suspension plasma spraying
(Elsevier, 2018-01)
In order to obtain thermal barrier coatings by Suspension Plasma Spraying (SPS) process with potential new self-healing ability multicomponent submicronic Y-TZP/Al2O3/SiC suspensions were prepared. For this purpose, ...
Non-isothermal sinter-crystallisation of satin glazes: A kinetic model
(Elsevier, 2018-05)
Many materials of a glass-ceramic nature are obtained by glass particle sinter-crystallisation, whose process kinetics have been studied very little. The present study analyses the physico-chemical transformations that ...
Solution precursor plasma spraying (SPPS): a novel and simple process to obtain bioactive glass coatings
(Elsevier, 2018)
This research addresses the use of an emerging plasma spray technique known as SPPS (Solution
Precursor Plasma Spraying) to obtain bioactive glass coatings. In SPPS, the feedstock is a sol precursor of
the bioactive glass ...
Effect of fluorine and nitrogen content on the properties of Ca-Mg-Si-Al-O-(N)-(F) glasses
(Elsevier, 2017)
X-ray amorphous glasses of composition (in equivalent percent) 15Ca:15Mg: 55Si:15Al:(100-x-y)O:xN:yF with x=0, 10, 15 and y=0, 1, 3, 5, were prepared by melting and casting. The effects of oxygen substitution by fluorine ...