Electrophoretic deposition of nanostructured-TiO2/chitosan composite coatings on stainless steel
Scholar | Other documents of the author: Cordero Arias, L.; Cabañas Polo, Sandra; Gao, Haoxiang; Gilabert, Jessica; Sánchez-Vilches, Enrique; Roether, J. A.; Schubert, D. W.; Virtanen, S.; Boccaccini, Aldo R.
MetadataShow full item record
TitleElectrophoretic deposition of nanostructured-TiO2/chitosan composite coatings on stainless steel
PublisherRoyal Society of Chemistry
Novel chitosan composite coatings containing titania nanoparticles (n-TiO2) for biomedical applications were developed by electrophoretic deposition (EPD) from ethanol–water suspensions. The optimal ethanol–water ratio ... [+]
Novel chitosan composite coatings containing titania nanoparticles (n-TiO2) for biomedical applications were developed by electrophoretic deposition (EPD) from ethanol–water suspensions. The optimal ethanol–water ratio was studied in order to avoid bubble formation during the EPD process and to ensure homogeneous coatings. Different n-TiO2 contents (0.5–10 g L−1) were studied for a fixed chitosan concentration (0.5 g L−1) and the properties of the electrophoretic coatings obtained were characterized. Coating composition was analyzed by thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. Scanning electron microscopy (SEM) was employed to study both the surface and the cross section morphology of the coatings, and the thicknesses (2–6 μm) of the obtained coatings were correlated with the initial ceramic content. Contact angle measurements, as a preliminary study to predict hypothetic protein attachment on the coatings, were performed for different samples and the influence of a second chitosan layer on top of the coatings was also tested. Finally, the electrochemical behavior of the coatings, evaluated by polarization curves in DMEM at 37 °C, was studied in order to assess the corrosion resistance provided by the n-TiO2/chitosan coatings. [-]
Bibliographic citationCordero-Arias L., Cabanas-Polo S., Gao H. X. , Gilabert J., Sanchez E., Roether J., Schubert D., Virtanen S. and Boccaccini A. R. : ‘Electrophoretic deposition of nanostructured TiO2/chitosan composite coatings on stainless steel’, RSC Adv., 2013, 3, 11247-11254.
This item appears in the folowing collection(s)
- QUI_Articles