Use of nanofiltration membrane technology for ceramic industry wastewater treatment
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Moliner Salvador, R.; Deratani, A.; Palmeri, J.; Sánchez-Vilches, Enrique
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7033
comunitat-uji-handle3:10234/8618
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Use of nanofiltration membrane technology for ceramic industry wastewater treatmentFecha de publicación
2012-03Editor
Sociedad Española de Cerámica y VidrioISSN
0366-3175; 2173-0431Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
http://ceramicayvidrio.revistas.csic.es/index.php/ceramicayvidrio/article/view/1 ...Versión
info:eu-repo/semantics/publishedVersionPalabras clave / Materias
Resumen
A study has been undertaken of an advanced wastewater treatment approach using polymer nanofiltration membranes, in
an attempt to obtain water of sufficient quality to allow it to be reused in the same production ... [+]
A study has been undertaken of an advanced wastewater treatment approach using polymer nanofiltration membranes, in
an attempt to obtain water of sufficient quality to allow it to be reused in the same production process or, alternatively, to be
discharged without any problems. The study has initially focused on the removal of organic matter (reduction of COD) and
the most representative ions present in the wastewater, such as Na+
, Mg2+, Cl-
, and SO4
2-
.
In a first part of the study, with a view to optimising the experimental phase, a simulation has been performed of the
nanofiltration process using the NanoFlux software. Among other things, the simulation allows the most suitable membranes
to be selected as a function of the permeate flow rate and desired level of retention in the substances to be removed. The
subsequent experimentation was carried out in a laboratory tangential filtration system that works with flat membranes.
It was found that retention values of about 90% were obtained for the studied substances, with a good permeate flow rate,
using low operating pressures. These results demonstrate the feasibility of the studied technology and its potential as a
treatment for improving ceramic industry wastewater quality [-]
Publicado en
Boletín de la Sociedad Española de Cerámica y Vidrio, 2012, març/abril, Vol. 51, núm. 2Derechos de acceso
© Sociedad Española de Cerámica y Vidrio
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- QUI_Articles [296]