Inkjet technology for ceramic products. Influence of some process variables on ink penetration
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: José Luis, Amorós Albaro; Moreno Berto, Arnaldo Vicente; Blasco Roca, Encarna; Pérez, Joaquín Javier; Navarro, Sandra; Reverter, Sandra
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/176601
comunitat-uji-handle3:10234/176618
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Inkjet technology for ceramic products. Influence of some process variables on ink penetrationAutoría
Fecha de publicación
2019-07-27Editor
Wiley; The American Ceramic SocietyCita bibliográfica
AMORÓS, Jose Luis, et al. Inkjet technology for ceramic products. Influence of some process variables on ink penetration. International Journal of Applied Ceramic Technology, 2019, 16.6: 2153-2160.Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://ceramics.onlinelibrary.wiley.com/doi/full/10.1111/ijac.13342Versión
info:eu-repo/semantics/acceptedVersionPalabras clave / Materias
Resumen
Inkjet technology has become very popular in recent years and is nowadays widely used for
decorating ceramic products. This has led to in-depth study of the operating principles and
process variables involved. These ... [+]
Inkjet technology has become very popular in recent years and is nowadays widely used for
decorating ceramic products. This has led to in-depth study of the operating principles and
process variables involved. These notably influence the properties of the deposited ink layers,
as do the physicochemical properties of the applied inks and of the glazes on which the inks are
deposited. The problems associated with these factors are further heightened when inks with
complex formulations designed to obtain special effects and specific surface properties are
used. This study examines the characteristics of the interface that developed on applying an ink
on a certain type of glaze, as well as the surface properties of the final product. The relationship
of the amount of ink applied per unit area and the particle size distribution of the glaze on which
it was deposited to ink penetration into the glaze layer was also investigated. The resulting
microstructures were observed by SEM, while the variation of glaze layer composition with
distance to the surface was determined by SEM-EDS. The results obtained were successfully
correlated with the porous texture of the unfired glaze (determined by SEM and mercury
porosimetry) and with unfired glaze particle size distribution. [-]
Derechos de acceso
© 2019 The American Ceramic Society
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- QUI_Articles [296]
- ITC_Articles [74]