Fire design of slim‐floor beams
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Romero, Manuel L.; Albero, Vicente; Espinós, Ana; Hospitaler, Antonio
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7035
comunitat-uji-handle3:10234/8617
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Fire design of slim‐floor beamsFecha de publicación
2019Editor
Ernst & Sohn; Wiley-VCH VerlagISSN
0038-9145; 1437-1049Cita bibliográfica
Romero, M. L., et al. Fire Design of Slim-Floor Beams. Stahlbau, 2019, vol. 88, núm. 7, 2019, pp. 665-674Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://onlinelibrary.wiley.com/doi/abs/10.1002/stab.201900030Versión
info:eu-repo/semantics/acceptedVersionPalabras clave / Materias
Resumen
Slim‐floor beams are a well‐known and cost‐effective solution that permits a significant reduction of floor thickness, and are increasingly used in industrial and commercial buildings. Since only their lower flange ... [+]
Slim‐floor beams are a well‐known and cost‐effective solution that permits a significant reduction of floor thickness, and are increasingly used in industrial and commercial buildings. Since only their lower flange is exposed to fire, slim‐floor beams may also achieve higher fire resistance, in comparison to other types of composite beams that are not fully embedded in the concrete floor. Simplified models are available in Eurocode 4 Parts 1‐2 to evaluate the temperature distribution for partially encased and non‐encased composite beams. However this standard does not provide any simplified model to evaluate the cross‐sectional temperature field of slim‐floor beams. In this sense, different proposals have been evaluated in recent years in order to provide simplified models for temperature evaluation. The currently available models in the literature have shown their accurate behaviour providing results on the safe side, and are recommended for use in practice. Finally, this work shows that slim‐floor composite beams can provide good performance during a fire event. Specifically, 60 min of standard fire rating can be achieved for load levels lower than 0.5–0.6. Improved behaviour to achieve 90 or 120 min of standard fire exposure may also be reached by using innovative solutions, advanced materials or external protection. [-]
Die Slim-Floor-Bauweise ist eine erprobte und wirtschaftliche Lösung. Sie ermöglicht unter anderem eine erhebliche Redu-zierung der Deckenstärke und wird zunehmend in Industrie- und Gewerbegebäuden eingesetzt. Darüber ... [+]
Die Slim-Floor-Bauweise ist eine erprobte und wirtschaftliche Lösung. Sie ermöglicht unter anderem eine erhebliche Redu-zierung der Deckenstärke und wird zunehmend in Industrie- und Gewerbegebäuden eingesetzt. Darüber hinaus erzielen Slim-Floor-Träger, da sie größtenteils in die Decke integriert sind und somit nur die untere angeschweißte Platte direkt einem Brand ausgesetzt wird, einen wesentlich höheren Feuer-widerstand als etwa klassische Verbundträger. In Eurocode4 Teil1-2 finden sich zwar vereinfachte Methoden zur Bestim-mung der Bauteiltemperaturen von Verbundträgern mit und ohne Kammerbeton, jedoch gibt diese Norm keine vereinfachte Methode zur Bestimmung der Temperaturen eines Slim-Floor-Querschnitts an. In den letzten Jahren wurden vereinfachte Modelle zur Bestimmung der Temperaturverteilung von Slim-Floor-Querschnitten entwickelt. Diese derzeit verfügbaren Mo-delle liefern Ergebnisse auf der sicheren Seite und können für eine praktische Anwendung durchaus empfohlen werden. In diesem Artikel wird gezeigt, dass Slim-Floor-Träger während eines Brandereignisses eine exzellente Tragfähigkeit besitzen. Insbesondere können für Ausnutzungsgrade von 0,5 bis 0,6 die Anforderungen an die Feuerwiderstandsklasse R60 erfüllt wer-den. Die Feuerwiderstandsklassen R90 und R120 können durch Anwendung innovativer Lösungen, durch verbesserte Materia-lien oder auch passiven Brandschutz erfüllt werden. [-]
Derechos de acceso
"This is the peer reviewed version of the following article: Romero, M. L., et al. Fire Design of Slim-Floor Beams. Stahlbau, 2019, vol. 88, núm. 7, 2019, pp. 665-674, which has been published in final form at https://doi.org/10.1111/twec.12950. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions."
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- EMC_Articles [832]