Listar ITC_Articles por autoría "2094c3ea-7a05-4098-8508-3363f80164a5"
Mostrando ítems 1-6 de 6
-
Effect of particle size distribution on the sinter-crystallisation kinetics of a SiO2-Al2O3-CaO-MgO-SrO glass-ceramic glaze
José Luis, Amorós Albaro; Blasco Roca, Encarna; Moreno Berto, Arnaldo Vicente; Marín, N.; Feliu Mingarro, Carlos Elsevier (2020-05-20)Sinter-crystallisation kinetics of a glaze with an average particle size of 9.6µm, 4.0µm and 0.65µm, which devitrified anorthoclase and diopside, were studied by non-isothermal techniques. It was confirmed that the ... -
Grain coarsening during liquid phase sintering of zircon-glass composites
José Luis, Amorós Albaro; Blasco Roca, Encarna; Moreno Berto, Arnaldo Vicente; Feliu Mingarro, Carlos Elsevier (2023-08-09)This study examined zircon grain growth during isothermal sintering of a zircon-glass composite with a zircon volume fraction of 0.525 zircon volume/solids volume, at a temperature of 1200 degrees C, with different residence ... -
Kinetics of the transformations occurring during the firing process of an industrial spray-dried porcelain stoneware body
José Luis, Amorós Albaro; Blasco Roca, Encarna; Moreno Berto, Arnaldo Vicente; Feliu Mingarro, Carlos Elsevier (2022-03-08)Pressed compacts of an industrial spray-dried porcelain stoneware powder, consisting mainly of albite, quartz, kaolinite, and illite, were thermally treated at different temperatures and times. Fired test piece bulk density ... -
Kinetics of viscous flow sintering of glass–zircon composites: effect of zircon volume fraction and particle size distribution
José Luis, Amorós Albaro; Blasco Roca, Encarna; Moreno Berto, Arnaldo Vicente; Feliu Mingarro, Carlos Elsevier ScienceDirect (2022-02-02)Viscous flow sintering of glass–zircon composites was studied by isothermal and constant-rate heating experiments. The sintering curves fitted very well to the developed kinetic model, based on the Kohlrausch–Williams–Watts ... -
Mechanical properties obtained by nanoindentation of sintered zircon-glass matrix composites
José Luis, Amorós Albaro; Blasco Roca, Encarna; Moreno Berto, Arnaldo Vicente; Feliu Mingarro, Carlos Elsevier (2020-01-10)This study was undertaken to determine the effect of zircon content and firing temperature on the hardness and indentation modulus of zircon–glass composites obtained by sintering. A standard non-devitrified borosilicate ... -
Non-isothermal sintering of powdered vitrified composites. A kinetic model
José Luis, Amorós Albaro; Blasco Roca, Encarna; Moreno Berto, Arnaldo Vicente; Zumaquero, Eulalia; Feliu Mingarro, Carlos Elsevier (2019)This report sets out the results obtained on studying the sintering process of glass–zircon composites, analysing the microstructural changes that developed on modifying zircon content. The sintering of composites with ...