Listar ITC_Articles por autoría "1e4641c3-9bc8-4195-9f4c-bb17418e531a"
Mostrando ítems 1-9 de 9
-
Effect of feedstock and plasma gun on the microstructure and bioactivity of plasma sprayed bioactive glass coatings
Cañas Recacha, Eugeni; Rojas, O.; Orts Tarí, María José; Ageorges, H.; Sánchez-Vilches, Enrique Elsevier (2021-01-25)Plasma–sprayed 45S5 bioactive glass coatings were manufactured using two types of powder feedstocks (commercial and lab–made 45S5 glass) and two plasma torches (single and triple cathode) to analyse their influence on ... -
Effect of fructose-containing feedstocks on the microstructure of multicomponent coatings deposited by suspension plasma spraying
Carnicer Cervera, Víctor; Martinez-Julian, F.; Orts Tarí, María José; Sánchez-Vilches, Enrique; Moreno, Rodrigo Elsevier (2019-04)This work addressed to investigate the use of fructose as an additive in the water-based suspension feedstock of a Y-TZP/Al2O3/SiC multicomponent coating manufactured by suspension plasma spraying. The effect of fructose ... -
Effect of type and amount of alumina as dopant over the densification and the electrical properties of zinc oxide ceramic electrodes
Sánchez-Rivera, María José; Orts Tarí, María José; Pérez-Herranz, Valentín; Mestre Beltrán, Sergio Elsevier (2021-02)Aluminum-doped zinc oxide (AZO) electrodes can be a good alternative to replace the expensive electrodes (Ti, ITO, FTO, etc.), which are used in the electrooxidation process to remove refractory and emergent contaminants ... -
Engineering zirconia coating microstructures by using saccharides in aqueous suspension plasma spraying feedstocks
Carnicer Cervera, Víctor; Orts Tarí, María José; Moreno, Rodrigo; Sánchez-Vilches, Enrique Elsevier (2020-10-15)This study aims to demonstrate the feasibility to develop columnar microstructures in zirconia coatings manufactured by suspension plasma spray, through the modification of the properties of the suspension feedstocks with ... -
Feasibility of incorporating silica aerogel in atmospheric plasma spraying coatings
Carnicer Cervera, Víctor; Cañas Recacha, Eugeni; Orts Tarí, María José; Sánchez-Vilches, Enrique Elsevier (2021-06-07)This study aims to demonstrate the feasibility of developing zirconia ceramic coatings with the incorporation of silica aerogel particles, which exhibit outstanding insulating properties. Thus, the research aims to find a ... -
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
Carnicer Cervera, Víctor; Orts Tarí, María José; Moreno, Rodrigo; Sánchez-Vilches, Enrique Elsevier (2019)The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ... -
Microfluidic rheology: A new approach to measure viscosity of ceramic suspensions at extremely high shear rates
Carnicer Cervera, Víctor; Alcazar Rodrigo, María Del Carmen; Orts Tarí, María José; Sánchez-Vilches, Enrique; Moreno, Rodrigo Elsevier ScienceDirect (2020-12-19)This paper describes the operation principles of a micro-scale rheometry equipment based on the technology of microchannels on a chip and compares it with a conventional macro-scale rotational rheometer. Both techniques ... -
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
Cañas Recacha, Eugeni; Orts Tarí, María José; Boccaccini, Aldo R.; Sánchez-Vilches, Enrique Elsevier (2018-12-20)The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ... -
Microstructure assessment of suspension plasma spraying coatings from multicomponent submicronic Y-TZP/Al2O3/SiC particles
Carnicer Cervera, Víctor; Orts Tarí, María José; Moreno, Rodrigo; Sánchez-Vilches, Enrique Elsevier (2018-08-01)In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of a multicomponent mixture made up of an Y-TZP/Al2O3 matrix with SiC particles. Two suspensions of Y-TZP and Al2O3 with ...