Buscar
Influence of the reactor configuration and the supporting electrolyte concentration on the electrochemical oxidation of Atenolol using BDD and SnO2 ceramic electrodes
(Elsevier, 2020)
Electrochemical oxidation of β-blocker atenolol (ATL, 100 ppm) at different
applied current densities (33, 50 and 83 mA·cm-2) using a reactor divided by an
ion-exchange membrane and an undivided one was investigated. Two ...
Additives for reducing the toxicity of respirable crystalline silica. SILIFE project
(EDP Sciences, 2017-10-23)
Prolonged inhalation of crystalline silica particles has long been known to cause lung
inflammation and development of the granulomatous and
a fibrogenic lung disease
known as silicosis
. The
International ...
Efecto del procesado de materias primas sobre su poder de emisión de polvo
(ElsevierSociedad Española de Cerámica y Vidrio, 2017)
En la manipulación y/o procesado de materiales pulverulentos en la industria cerámica, uno de los riesgos más importantes desde el punto de vista ambiental y de higiene laboral es la generación de polvo ambiental. En este ...
Cenizas del tamo de arroz como substituto del feldespato en la fabricación de cerámica Blanca
(CSIC-Consejo Superior de Investigaciones CientíficasSociedad Española de Cerámica y Vidrio, 2013-01)
La sustitución de materias primas para procesamiento de materiales -de alto consumo energético- por residuos agrícolas
y agroindustriales impacta positivamente el medio ambiente. Uno de estos residuos es la paja o tamo ...
An estimate of quartz content and particle size in porcelain tiles from young's modulus measurements
(Elsevier, 2017)
The influence of quartz particle size, weight content and firing temperature on the Young's modulus of porcelain tiles was studied. To simulate a porcelain tile microstructure, an albite glass matrix with added crystalline ...
Non-isothermal sinter-crystallisation of satin glazes: A kinetic model
(Elsevier, 2018-05)
Many materials of a glass-ceramic nature are obtained by glass particle sinter-crystallisation, whose process kinetics have been studied very little. The present study analyses the physico-chemical transformations that ...
Solution precursor plasma spraying (SPPS): a novel and simple process to obtain bioactive glass coatings
(Elsevier, 2018)
This research addresses the use of an emerging plasma spray technique known as SPPS (Solution
Precursor Plasma Spraying) to obtain bioactive glass coatings. In SPPS, the feedstock is a sol precursor of
the bioactive glass ...
Effect of fluorine and nitrogen content on the properties of Ca-Mg-Si-Al-O-(N)-(F) glasses
(Elsevier, 2017)
X-ray amorphous glasses of composition (in equivalent percent) 15Ca:15Mg: 55Si:15Al:(100-x-y)O:xN:yF with x=0, 10, 15 and y=0, 1, 3, 5, were prepared by melting and casting. The effects of oxygen substitution by fluorine ...
Processing–microstructure–properties relationship in a CuNiZn ferrite
(Elsevier, 2018)
CuNiZn ferrites are polycrystalline ceramic materials that are used widely in electronic devices for a number of reasons, including their high permeability in the RF frequency region, electrical resistivity, mechanical ...
Application of the Service-Learning Methodology to the Development of the End of Degree Project in chemical Engineering
(Servicio Editorial de la Universidad del País Vasco, 2017-07)
This paper aims to demonstrate how the SL methodology can be incorporated into
the development of the End of Degree Project (EDP) in a Bachelor Degree in Chemical
Engineering, allowing the students, while performing the ...