Buscar
Magnetic Photocatalyst for Wastewater Tertiary Treatment at Pilot Plant Scale: Disinfection and Enrofloxacin Abatement
(MDPI, 2021-01)
In this work, we have tested a photocatalytic material consisting of a core of SiO2/Fe3O4
coated with TiO2 (Magnox) for plausible tertiary wastewater treatment. For this, a pilot plant of
45 L equipped with an Ultraviolet ...
Preparation of chamott es as raw material for low - cost ceramic membranes
(Wiley, 2016)
Low cost ceramic membranes are usually prepared fro
m a mixture of natural raw
materials and some organic porogen agent, as starch
. The fact that the porogen must be
completely eliminated during firing, leaving an ...
Calcium carbonate decomposition in white-body tiles during firing in the presence of carbon dioxide
(Elsevier, 2013-08)
This study examines the thermal decomposition process of the calcium carbonate (calcite powder) contained in test pieces of porous ceramics, of the same composition as that used in manufacturing ceramic wall tile bodies, ...
Polishing of Porcelain Tiles in Industrial- and Laboratory-scale
(German Ceramic Society, 2013)
This work reports the design and use of a laboratory-scale tribometer and a new developed tool-holder to reproduce the industrial polishing process for ceramic tiles in laboratory-scale. The mechanical conditions in a ...
Alkaline activation of ceramic waste materials
(Springer, 2013-12)
Ceramic materials represent around 45% of construction and demolition waste, and originate not only from the building process, but also as rejected bricks and tiles from industry. Despite the fact that these wastes are ...
Non-isothermal sinter-crystallisation of satin glazes: A kinetic model
(Elsevier, 2018-05)
Many materials of a glass-ceramic nature are obtained by glass particle sinter-crystallisation, whose process kinetics have been studied very little. The present study analyses the physico-chemical transformations that ...
Efecto del procesado de materias primas sobre su poder de emisión de polvo
(ElsevierSociedad Española de Cerámica y Vidrio, 2017)
En la manipulación y/o procesado de materiales pulverulentos en la industria cerámica, uno de los riesgos más importantes desde el punto de vista ambiental y de higiene laboral es la generación de polvo ambiental. En este ...
Cenizas del tamo de arroz como substituto del feldespato en la fabricación de cerámica Blanca
(CSIC-Consejo Superior de Investigaciones CientíficasSociedad Española de Cerámica y Vidrio, 2013-01)
La sustitución de materias primas para procesamiento de materiales -de alto consumo energético- por residuos agrícolas
y agroindustriales impacta positivamente el medio ambiente. Uno de estos residuos es la paja o tamo ...
Post-deposition heat treatment effect on microstructure of suspension plasma sprayed bioactive glass coatings
(Elsevier, 2018-11)
This research addresses a simple and easy method to improve the microstructure of
suspension plasma sprayed bioactive glass coatings. Based on previous research of the group,
a SPS bioactive glass coating was deposited ...
A general method to determine optimal thermal cycles based on solid-state sintering fundamentals
(Elsevier, 2019-04-01)
Most technical ceramics require processing up to and including final-stage sintering to obtain a high-density bulk while inhibiting grain growth as dominant sintering process as far as possible. The literature typically ...