Gel–Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Sen, Sudeshna; Goodwin, Sean E.; Verdía, Pedro; Rance, Graham; Wales, Dominic; Cameron, Jamie; Sans, Victor; Mamlouk, Mohamed; scott, keith; Walsh, Darren
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/160292
comunitat-uji-handle3:10234/160293
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Gel–Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid NetworksAutoría
Fecha de publicación
2021-01-08Editor
American Chemical SocietyISSN
2637-6105Cita bibliográfica
Gel–Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks Sudeshna Sen, Sean E. Goodwin, Pedro Verdía Barbará, Graham A. Rance, Dominic Wales, Jamie M. Cameron, Victor Sans, Mohamed Mamlouk, Keith Scott, and Darren A. Walsh ACS Applied Polymer Materials 2021 3 (1), 200-208 DOI: 10.1021/acsapm.0c01042Tipo de documento
info:eu-repo/semantics/articleVersión
info:eu-repo/semantics/acceptedVersionPalabras clave / Materias
Resumen
The use of electrically charged, polymerized ionic liquids (polyILs) offers opportunities for the development of gel–polymer electrolytes (GPEs), but the rational design of such systems is in its infancy. In this work, ... [+]
The use of electrically charged, polymerized ionic liquids (polyILs) offers opportunities for the development of gel–polymer electrolytes (GPEs), but the rational design of such systems is in its infancy. In this work, we compare the properties of polyIL/IL GPEs based on 1-butyl-3-(4-vinylbenzyl)imidazolium bis(trifluromethanesulfonyl)imide containing trapped ammonium-based protic ionic liquids (ILs) with an analogous series based on the electrically neutral host polymer 1-(4-vinylbenzyl)imidazole. The materials are synthesized by photopolymerizing ionic and neutral monomers in the presence of diethylmethylammonium trifluoromethanesulfonate, [dema][TfO], diethylmethylammonium trifluoroacetate, [dema][TFAc], and diethylmethylammonium bis[trifluoromethanesulfonyl]imide, [dema][Tf2N], respectively. The resulting materials are characterized using electron microscopy, infrared spectroscopy, thermal analysis, Raman spectroscopy, and AC-impedance analysis. Spectroscopic analysis confirms that the ILs are distributed throughout the polymers, unless the GPE also contains poly(diallyldimethylammonium) bis[trifluoromethanesulfonyl]imide, when separation of the components occurs. The polyIL/IL GPEs are more electrochemically and thermally stable, and up to six times more conductive, than the materials based on the neutral host. As a proof-of-concept demonstration, we show that polyIL/IL gels can be 3D printed using readily available 3D-printing hardware. [-]
Publicado en
ACS Appl. Polym. Mater. 2021, 3, 1, 200–208Datos relacionados
https://pubs.acs.org/doi/10.1021/acsapm.0c01042Entidad financiadora
Engineering and Physical Sciences Research Council (EPSRC) | University of Nottingham | Generalitat Valenciana
Código del proyecto o subvención
EP/P002382/1 | CIDEGENT/2018/036
Derechos de acceso
Copyright © 2020 American Chemical Society
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- INAM_Articles [520]