Search
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Tile decoration with greener technologies: spray pyrolysis and solution combustion synthesis for alternative colorations
(Universitat Politècnica de Catalunya- BarcelonaTECH.Sociedad Española de Cerámica y VidrioSocedade Portuguesa de Cerámica e VidroCentro de Integridad Estructural, Fiabilidad y Micromecánica de los Materiales (CIEFMA-UPC), 2018-10)
The great concern about environmental impacts of different industries if forcing the research in more nature-friendly processes. In the case of ceramic tiles manufacture, decoration stage consumes pigments or frits for ...
KATCH_e: Training materials and tools for circular economy in practice
(Institute for Sustainability Science and Technology , Universitat Politècnica de Catalunya, 2019-10-15)
KATCH_e is a knowledge alliance between research centres, universities and companies to build competences in the field of product-service development for the circular economy and sustainability. This ERASMUS + funded project ...
Strategic environmental communication tools
(Qualicer, 2014)
The Instituto de Tecnología Cerámica (ITC), pursuing its programme of actions aimed at transferring knowledge to the ceramic industry, presents the following work to facilitate the entry of ceramic coverings to markets ...
Estimación de la huella hídrica de baldosas de gres porcelánico esmaltado
(Sociedad Española de Cerámica y VidrioAsociación Española de Técnicos Cerámicos, 2013)
En este trabajo se presenta un primer estudio de la estimación de la huella
hídrica de las baldosas de gres porcelánico esmaltado, realizado a partir de
datos sectoriales, es decir, no es un estudio específico de ninguna ...
Ecological low-cost ceramic membranes based on olive stones as pore former
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-13)
They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes
Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR)
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-10)
The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...
Nanofriltration treatment for boron removal from ceramic industry wastewater
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-11)
Water is a limited natural resource and in many regions of the planet, it is also scarce. Consequently, water management has become a very important issue in many traditional industrial sectors which are water consumers ...
Ink-jet technology applied to engineer low-cost ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
Adhesion assessment of bioactive coatings deposited by atmospheric plasma spraying
(Akadémiai Kiadó, 2017-07-09)
The aim of the present work is to prepare bioactive coatings by APS employing different spraying parameters and substrates in order to model the adhesion of the coatings and to determine the best parameters that allow to ...