Buscar
Ink-jet technology applied to engineer low-cost ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
Microstructure assessment of suspension plasma spraying coatings from multicomponent submicronic Y-TZP/Al2O3/SiC particles
(Elsevier, 2018-08-01)
In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of a multicomponent mixture made up of an Y-TZP/Al2O3 matrix with SiC particles. Two suspensions of Y-TZP and Al2O3 with ...
Environmental profile of Spanish porcelain stoneware tiles
(Springer, 2018-08)
Purpose
Porcelain stoneware tile (PST) iscurrently the ceram-
ic tile of greatest commercial and innovation interest. An envi-
ronmental life cycle assessment of different varieties of PST
was undertaken to enable ...
Effect of fructose-containing feedstocks on the microstructure of multicomponent coatings deposited by suspension plasma spraying
(Elsevier, 2019-04)
This work addressed to investigate the use of fructose as an additive in the water-based suspension feedstock of a Y-TZP/Al2O3/SiC multicomponent coating manufactured by suspension plasma spraying. The effect of fructose ...
CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes
(American Ceramic Society, 2018-12)
Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants ...
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
(Elsevier, 2018-12-20)
The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ...
Influence of microstructure and magnetizing mechanisms on magnetic complex permeability (imaginary part) of a Cu-doped Ni-Zn polycrystalline ferrite
(Elsevier, 2021)
The complex permeability of the Cu-doped Ni–Zn polycrystalline ferrites is strongly dependent on microstructure, particularly on relative density (ϕ) and average grain size (G), as it has been shown in a previous ...
Effect of feedstock and plasma gun on the microstructure and bioactivity of plasma sprayed bioactive glass coatings
(Elsevier, 2021-01-25)
Plasma–sprayed 45S5 bioactive glass coatings were manufactured using two types of powder
feedstocks (commercial and lab–made 45S5 glass) and two plasma torches (single and triple
cathode) to analyse their influence on ...
KATCH_e: Training materials and tools for circular economy in practice
(Institute for Sustainability Science and Technology , Universitat Politècnica de Catalunya, 2019-10-15)
KATCH_e is a knowledge alliance between research centres, universities and companies to build competences in the field of product-service development for the circular economy and sustainability. This ERASMUS + funded project ...
Industry-scalable wall tile composition based on circular economy
(Sociedad Española de Cerámica y Vidrio, 2022-08)
En el marco de la economía circular y la valorización de residuos, el presente trabajo aborda la posibilidad de fabricar azulejos cuyos soportes incluyan residuos en su formulación. Los residuos seleccionados son tiesto ...