Buscar
Industry-scalable wall tile composition based on circular economy
(Sociedad Española de Cerámica y Vidrio, 2022-08)
En el marco de la economía circular y la valorización de residuos, el presente trabajo aborda la posibilidad de fabricar azulejos cuyos soportes incluyan residuos en su formulación. Los residuos seleccionados son tiesto ...
Tile decoration with greener technologies: spray pyrolysis and solution combustion synthesis for alternative colorations
(Universitat Politècnica de Catalunya- BarcelonaTECH.Sociedad Española de Cerámica y VidrioSocedade Portuguesa de Cerámica e VidroCentro de Integridad Estructural, Fiabilidad y Micromecánica de los Materiales (CIEFMA-UPC), 2018-10)
The great concern about environmental impacts of different industries if forcing the research in more nature-friendly processes. In the case of ceramic tiles manufacture, decoration stage consumes pigments or frits for ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Non-isothermal sintering of powdered vitrified composites. A kinetic model
(Elsevier, 2019)
This report sets out the results obtained on studying the sintering process of glass–zircon composites,
analysing the microstructural changes that developed on modifying zircon content. The sintering of composites with ...
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
(Elsevier, 2019)
The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ...
Revisiting pyroplastic deformation. Application for porcelain stoneware tile bodies
(Elsevier, 2018-09-21)
In this research an analysis of firing deformation tendency in porcelain stoneware tile compositions was carried out based on pyroplastic deformation measurements. The effect of the amount and nature of some fluxing additives ...
Sintered microstructure effect on RF-wave shielding properties of a Cu-doped Ni–Zn-polycrystalline ferrite
(Elsevier, 2021)
The shielding properties of a Cu-doped Ni–Zn polycrystalline ferrite in the frequency range 1 MHz to 1 GHz were explored. Samples of composition (Cu0.12Ni0.23Zn0.65)Fe2O4 were prepared by the traditional ceramic route. The ...
A numerical approach for the combined analysis of the dynamic thermal behaviour of an entire ceramic roller kiln and the stress formation in the tiles
(Elsevier, 2019-04-12)
The numerical analysis of thermal and fluid dynamics behaviour of an industrial roller kiln used for manufacturing ceramic tiles is carried out and combined with the analysis of the mechanical stresses formed in the final ...
Engineering zirconia coating microstructures by using saccharides in aqueous suspension plasma spraying feedstocks
(Elsevier, 2020-10-15)
This study aims to demonstrate the feasibility to develop columnar microstructures in zirconia coatings manufactured by suspension plasma spray, through the modification of the properties of the suspension feedstocks with ...
Effect of particle size distribution on the sinter-crystallisation kinetics of a SiO2-Al2O3-CaO-MgO-SrO glass-ceramic glaze
(Elsevier, 2020-05-20)
Sinter-crystallisation kinetics of a glaze with an average particle size of 9.6µm, 4.0µm and 0.65µm, which devitrified anorthoclase and diopside, were studied by non-isothermal techniques. It was confirmed that the ...