Buscar
Characterization of thermal barriers coatings of Y-TZP/AL2O3/SiC composite obtained by suspension plasma spraying
(Akadémiai Kiadó, 2017-07-09)
The aim of this work is to improve TBCs providing a self-healing ability. For that purpose, an aqueous suspension of SiCY-TZP and Al2O3 was prepared and deposited by suspension plasma spraying to avoid the oxidation of ...
Microfluidic rheology: A new approach to measure viscosity of ceramic suspensions at extremely high shear rates
(Elsevier ScienceDirect, 2020-12-19)
This paper describes the operation principles of a micro-scale rheometry equipment based on the technology of microchannels on a chip and compares it with a conventional macro-scale rotational rheometer. Both techniques ...
Ecological low-cost ceramic membranes based on olive stones as pore former
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-13)
They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes
Nanofriltration treatment for boron removal from ceramic industry wastewater
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-11)
Water is a limited natural resource and in many regions of the planet, it is also scarce. Consequently, water management has become a very important issue in many traditional industrial sectors which are water consumers ...
Ink-jet technology applied to engineer low-cost ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
Adhesion assessment of bioactive coatings deposited by atmospheric plasma spraying
(Akadémiai Kiadó, 2017-07-09)
The aim of the present work is to prepare bioactive coatings by APS employing different spraying parameters and substrates in order to model the adhesion of the coatings and to determine the best parameters that allow to ...
Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR)
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-10)
The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
(Elsevier, 2019)
The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Revisiting pyroplastic deformation. Application for porcelain stoneware tile bodies
(Elsevier, 2018-09-21)
In this research an analysis of firing deformation tendency in porcelain stoneware tile compositions was carried out based on pyroplastic deformation measurements. The effect of the amount and nature of some fluxing additives ...