Buscar
Microstructure assessment of suspension plasma spraying coatings from multicomponent submicronic Y-TZP/Al2O3/SiC particles
(Elsevier, 2018-08-01)
In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of a multicomponent mixture made up of an Y-TZP/Al2O3 matrix with SiC particles. Two suspensions of Y-TZP and Al2O3 with ...
Effect of fructose-containing feedstocks on the microstructure of multicomponent coatings deposited by suspension plasma spraying
(Elsevier, 2019-04)
This work addressed to investigate the use of fructose as an additive in the water-based suspension feedstock of a Y-TZP/Al2O3/SiC multicomponent coating manufactured by suspension plasma spraying. The effect of fructose ...
CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes
(American Ceramic Society, 2018-12)
Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants ...
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
(Elsevier, 2018-12-20)
The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ...
KATCH_e: Training materials and tools for circular economy in practice
(Institute for Sustainability Science and Technology , Universitat Politècnica de Catalunya, 2019-10-15)
KATCH_e is a knowledge alliance between research centres, universities and companies to build competences in the field of product-service development for the circular economy and sustainability. This ERASMUS + funded project ...
Tile decoration with greener technologies: spray pyrolysis and solution combustion synthesis for alternative colorations
(Universitat Politècnica de Catalunya- BarcelonaTECH.Sociedad Española de Cerámica y VidrioSocedade Portuguesa de Cerámica e VidroCentro de Integridad Estructural, Fiabilidad y Micromecánica de los Materiales (CIEFMA-UPC), 2018-10)
The great concern about environmental impacts of different industries if forcing the research in more nature-friendly processes. In the case of ceramic tiles manufacture, decoration stage consumes pigments or frits for ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Non-isothermal sintering of powdered vitrified composites. A kinetic model
(Elsevier, 2019)
This report sets out the results obtained on studying the sintering process of glass–zircon composites,
analysing the microstructural changes that developed on modifying zircon content. The sintering of composites with ...
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
(Elsevier, 2019)
The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ...
Revisiting pyroplastic deformation. Application for porcelain stoneware tile bodies
(Elsevier, 2018-09-21)
In this research an analysis of firing deformation tendency in porcelain stoneware tile compositions was carried out based on pyroplastic deformation measurements. The effect of the amount and nature of some fluxing additives ...