On Mott-Schottky analysis interpretation of capacitance measurements in organometal perovskite solar cells
Impact
Scholar |
Other documents of the author: Almora Rodríguez, Osbel; Aranda Alonso, Clara; Mas, Elena; Garcia-Belmonte, Germà
Metadata
Show full item recordcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/2507
comunitat-uji-handle3:10234/6973
comunitat-uji-handle4:
INVESTIGACIONMetadata
Title
On Mott-Schottky analysis interpretation of capacitance measurements in organometal perovskite solar cellsDate
2016Publisher
AIP PublishingISSN
0003-6951; 1077-3118Bibliographic citation
ALMORA, Osbel, et al. On Mott-Schottky analysis interpretation of capacitance measurements in organometal perovskite solar cells. Applied Physics Letters, 2016, vol. 109, no 17, p. 173903Type
info:eu-repo/semantics/articlePublisher version
http://aip.scitation.org/doi/full/10.1063/1.4966127Version
info:eu-repo/semantics/publishedVersionSubject
Abstract
Capacitance response of perovskite-based solar cells (PSCs) can be exploited to infer underlying physical mechanisms, both in the materials bulk and at outer interfaces. Particularly interesting is applying the depletion ... [+]
Capacitance response of perovskite-based solar cells (PSCs) can be exploited to infer underlying physical mechanisms, both in the materials bulk and at outer interfaces. Particularly interesting is applying the depletion layer capacitance theory to PSCs, following common procedures used with inorganic and organic photovoltaic devices. Voltage-modulation of the depletion layer width allows extracting relevant parameters as the absorber defect density and built-in potential by means of the Mott-Schottky (MS) analysis. However, the uncritical use of the MS technique may be misleading and yields incorrect outcomes as a consequence of masking effects that accumulation capacitances, commonly observed in PSCs, produce on the measured capacitance value. Rules are provided here to select the measuring frequency that allows extracting depletion layer capacitance, and the voltage range in which it dominates, avoiding accumulation capacitive parasitic contributions. It is noted that the distinction of the depletion capacitance from the accumulation capacitance is only feasible in the case of perovskite layers containing significant defect density (∼1017 cm−3). It is confirmed that MS reproducibility is assured by hysteresis reduction at slow scan rates, and positive bias starting polarization. A complete procedure with specific checking points is provided here for consistent MS measurement and interpretation. [-]
Is part of
Applied Physics Letters, 2016, vol. 109, no 17Rights
This item appears in the folowing collection(s)
- FCA_Articles [511]