Buscar
Mostrando ítems 1-8 de 8
Firing deformation in large size porcelain tiles. Effect of compositional and process variables
(Qualicer, 2018-03-12)
The manufacture of porcelain stoneware has undergone a spectacular
growth in the last years, as a result of the good technical and functional
performance associated to the impervious feature of the sintered product, ...
Improvement of behaviour in the extrusion of low plasticity ceramics
(Qualicer, 2018-02-12)
Shaping by extrusion may be used for the manufacture of tiles, bricks, and also
refractory products. The three fundamental aspects that must be considered to achieve
ideal extrusion conditions are the nature of the ...
Ecological low-cost ceramic membranes based on olive stones as pore former
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-13)
They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes
Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR)
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-10)
The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...
Ink-jet technology applied to engineer low-cost ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
Tile decoration with greener technologies: spray pyrolysis and solution combustion synthesis for alternative colorations
(Universitat Politècnica de Catalunya- BarcelonaTECH.Sociedad Española de Cerámica y VidrioSocedade Portuguesa de Cerámica e VidroCentro de Integridad Estructural, Fiabilidad y Micromecánica de los Materiales (CIEFMA-UPC), 2018-10)
The great concern about environmental impacts of different industries if forcing the research in more nature-friendly processes. In the case of ceramic tiles manufacture, decoration stage consumes pigments or frits for ...
Desarrollo de membranas cerámicas de bajo coste para diferentes aplicaciones
(Universidad de Salamanca, 2018-07)
Las membranas cerámicas son muy interesantes para diferentes procesos, pero el coste de las membranas comerciales (basadas en materiales como alúmina, circona, titania...), supera en mucho al de las membranas poliméricas. ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.