Performance of NiCrAlY Coatings Deposited by Oxyfuel Thermal Spraying in High Temperature Chlorine Environment
![Thumbnail](/xmlui/bitstream/handle/10234/127765/63902.pdf.jpg?sequence=4&isAllowed=y)
Visualitza/
Impacte
![Google Scholar](/xmlui/themes/Mirage2/images/uji/logo_google.png)
![Microsoft Academico](/xmlui/themes/Mirage2/images/uji/logo_microsoft.png)
Metadades
Mostra el registre complet de l'elementcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7034
comunitat-uji-handle3:10234/8619
comunitat-uji-handle4:
INVESTIGACIONMetadades
Títol
Performance of NiCrAlY Coatings Deposited by Oxyfuel Thermal Spraying in High Temperature Chlorine EnvironmentAutoria
Data de publicació
2014-10Editor
Springer VerlagCita bibliogràfica
HABIB, K. A., et al. Performance of NiCrAlY Coatings Deposited by Oxyfuel Thermal Spraying in High Temperature Chlorine Environment. Journal of Materials Engineering and Performance, 2014, 23.10: 3511-3522.Tipus de document
info:eu-repo/semantics/articleVersió de l'editorial
http://link.springer.com/article/10.1007/s11665-014-1160-zParaules clau / Matèries
Resum
A microcrystalline Ni-22Cr-10Al-1Y (wt.%) coating was deposited on AISI 304 stainless steel by the oxyfuel thermal spray technique. The deposited coating was subjected to heat treatment to improve the microstructure ... [+]
A microcrystalline Ni-22Cr-10Al-1Y (wt.%) coating was deposited on AISI 304 stainless steel by the oxyfuel thermal spray technique. The deposited coating was subjected to heat treatment to improve the microstructure characteristics and its corresponding high-temperature properties. The isothermal high-temperature corrosion behavior at 650 and 700 °C in synthetic air and in the presence of 1% Cl2 was investigated using thermogravimetric analysis, x-ray diffraction, and scanning electron microscopy with energy-dispersive x-ray spectroscopy. The results indicated that the deposited NiCrAlY coating possessed acceptable oxidation-corrosion resistance at 650 °C owing to the formation of extensive amounts of the protective oxide of Cr2O3; NiO and a lesser amount of a Cr1.12 Ni2,88 metallic phase are also formed. At 700 °C, the coating lost its protective characteristic because of the excessive consumption of thermodynamically stable phases by oxidation-chlorination process. In this case, the steel base and the coating were attacked by chlorine during the exposure time; the mass gain of the NiCrAlY coating was slightly higher and provided only a limited protection up to 11 h; thereafter, breakdown of the layer of oxides occurred and this is attributed to the formation of non-protective oxides mainly β-Fe2O3 and Fe21.33O32 and the depletion of chromium. [-]
Publicat a
Journal of Materials Engineering and Performance October 2014, Volume 23, Issue 10Drets d'accés
© Springer International Publishing AG, Part of Springer Science+Business Media
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Apareix a les col.leccions
- ESID_Articles [480]