Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact
Visualitza/
Impacte
Scholar |
Altres documents de l'autoria: Chavhan, Sudam; Miguel, Óscar; Grande, Hans-Jurgen; González Pedro, Victoria; S. Sánchez, Rafael; Barea, Eva M; Mora-Sero, Ivan; Tena-Zaera, Ramón
Metadades
Mostra el registre complet de l'elementcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/2507
comunitat-uji-handle3:10234/6973
comunitat-uji-handle4:
INVESTIGACIONMetadades
Títol
Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contactAutoria
Data de publicació
2014-06Editor
Royal Society of ChemistryCita bibliogràfica
CHAVHAN, Sudam, et al. Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact. Journal of Materials Chemistry A, 2014, 2.32: 12754-12760.Tipus de document
info:eu-repo/semantics/articleVersió de l'editorial
http://pubs.rsc.org/en/content/articlehtml/2014/ta/c4ta01310gVersió
info:eu-repo/semantics/publishedVersionParaules clau / Matèries
Resum
CuSCN is proposed as a cost-competitive hole selective contact for the emerging organo-metal halide perovskite-based solar cells. The CuSCN films have been deposited by a solution casting technique, which has proven ... [+]
CuSCN is proposed as a cost-competitive hole selective contact for the emerging organo-metal halide perovskite-based solar cells. The CuSCN films have been deposited by a solution casting technique, which has proven to be compatible with the perovskite films, obtaining planar-like heterojunction-based glass/FTO/TiO2/CH3NH3PbI3−xClx/CuSCN/Au solar cells with a power conversion efficiency of 6.4%. Among the photovoltaic parameters, the fill factor (i.e. 62%) suggests good carrier selectivity and, therefore, efficient functionality of the TiO2 and CuSCN charge carrier selective contacts. However, the open-circuit voltage (Voc), which remains low in comparison with the state of the art perovskite-based solar cells, appears to be the main limiting parameter. This is attributed to the short diffusion length as determined by impedance spectroscopy. However, the recombination losses are not only affected by the CuSCN, but also by the perovskite film. Indeed, variations of 20 °C in the thermal annealing of the perovskite films result in changes larger than 200 mV in the Voc. Furthermore, a detailed analysis of the quantum efficiency spectra contributes significant insights into the influence of the selective contacts on the photocurrent of the planar heterojunction perovskite solar cells. [-]
Publicat a
Journal of Materials Chemistry A, 2014, 2.32Drets d'accés
© The Royal Society of Chemistry 2014
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Apareix a les col.leccions
- FCA_Articles [511]