Buscar
Fuel effect on solution combustion synthesis of Co(Cr,Al)2O4 pigments
(Elsevier, 2017-10)
The fuel effect on the synthesis of a ceramic pigment with a composition CoCr2−2ΨAl2ΨO4 (0 ≤ Ψ ≤ 1) by means of solution combustion synthesis process (SCS) has been studied. Three different fuels were selected to carry out ...
Improvement of behaviour in the extrusion of low plasticity ceramics
(Qualicer, 2018-02-12)
Shaping by extrusion may be used for the manufacture of tiles, bricks, and also
refractory products. The three fundamental aspects that must be considered to achieve
ideal extrusion conditions are the nature of the ...
Ecological low-cost ceramic membranes based on olive stones as pore former
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-13)
They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes
Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR)
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-10)
The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...
Ink-jet technology applied to engineer low-cost ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
Bioactive glass coatings by suspension plasma spraying from glycoletherbased solvent feedstock
(Elsevier, 2017)
Bioactive glasses are emerging as a substitute of hydroxyapatite in the development of
bioactive coatings for biomedical applications. The deposition of these coatings is carried out
by a wide range of methods, being ...
Solution precursor plasma spraying (SPPS): a novel and simple process to obtain bioactive glass coatings
(Elsevier, 2018)
This research addresses the use of an emerging plasma spray technique known as SPPS (Solution
Precursor Plasma Spraying) to obtain bioactive glass coatings. In SPPS, the feedstock is a sol precursor of
the bioactive glass ...
Cenizas del tamo de arroz como substituto del feldespato en la fabricación de cerámica Blanca
(CSIC-Consejo Superior de Investigaciones CientíficasSociedad Española de Cerámica y Vidrio, 2013-01)
La sustitución de materias primas para procesamiento de materiales -de alto consumo energético- por residuos agrícolas
y agroindustriales impacta positivamente el medio ambiente. Uno de estos residuos es la paja o tamo ...
Non-isothermal sinter-crystallisation of satin glazes: A kinetic model
(Elsevier, 2018-05)
Many materials of a glass-ceramic nature are obtained by glass particle sinter-crystallisation, whose process kinetics have been studied very little. The present study analyses the physico-chemical transformations that ...
Molten salt attack on multilayer and functionally-graded YSZ coatings
(Elsevier, 2018-08-01)
Thermal barrier coatings have been extensively studied in the last years in order to increase the operational temperature of the current gas turbines as well as to improve the coating lifetime. Many coating characteristics ...