Buscar
Electrochemical Degradation of Reactive Black 5 using two-different reactor configuration
(Nature Research, 2020)
Novel Sb-doped SnO2 ceramic electrodes sintered at different temperatures, are applied to the degradation of Reactive Black 5 in both divided and undivided electrochemical reactors. In the undivided reactor the discoloration ...
Single droplet drying of detergents: Experimentation and modelling
(ElsevierInstitute of Process EngineeringChinese Society of ParticuologyScience Press, 2021-03-03)
This study evaluates the single droplet drying (SDD) of detergents. Experimental data are used to validate a theoretical multistage model. The experiments are carried out in an acoustic levitator analysing six different ...
Inkjet technology for ceramic products. Influence of some process variables on ink penetration
(WileyThe American Ceramic Society, 2019-07-27)
Inkjet technology has become very popular in recent years and is nowadays widely used for
decorating ceramic products. This has led to in-depth study of the operating principles and
process variables involved. These ...
Low-cost ceramic membranes: A research opportunity for industrial application
(Elsevier, 2019-03)
Obtaining low-cost ceramic membranes has attracted great interest in the scientific community in last years, as it allows to preserve the advantages of ceramic materials while significantly reduce their manufacturing costs. ...
Residual stresses in porcelain tiles. Measurement and process variables assessment
(Elsevier, 2019-04-22)
This research addresses the residual stresses phenomenon taking place during the manufacture of porcelain tiles. Residual stresses were quantified by the strain relaxation slotting method. The method is based on the fact ...
Low-cost ceramic membrane bioreactor: Effect of backwashing, relaxation and aeration on fouling. Protozoa and bacteria removal
(Elsevier, 2022-07-04)
Membrane biological reactors (MBR) constitute an alternative to conventional wastewater treatments for improved recovery, reuse, and recycling of water. MBRs have a smaller footprint, provide better biotreatment and achieve ...
Effect of firing temperature on humidity self-regulation functionality in a ceramic tile composition
(Elsevier, 2022-07-19)
The effect of sintering temperature on the humidity regulating capacity of a ceramic composition based on the mineral gibbsite has been studied. The humidity self-regulation functionality is due to the presence of mesopores ...
Feasibility of incorporating silica aerogel in atmospheric plasma spraying coatings
(Elsevier, 2021-06-07)
This study aims to demonstrate the feasibility of developing zirconia ceramic coatings with the incorporation of silica aerogel particles, which exhibit outstanding insulating properties. Thus, the research aims to find a ...
Kinetics of viscous flow sintering of glass–zircon composites: effect of zircon volume fraction and particle size distribution
(Elsevier ScienceDirect, 2022-02-02)
Viscous flow sintering of glass–zircon composites was studied by isothermal and constant-rate heating experiments. The sintering curves fitted very well to the developed kinetic model, based on the Kohlrausch–Williams–Watts ...
Valorización de residuos de diferentes industrias en la fabricación de baldosas cerámicas
(Comité del Congreso, 2021-09)
En el marco de la economía circular y la valorización de residuos, el presente trabajo trata sobre la
posibilidad de fabricar azulejos cuyos soportes incluyen residuos en su formulación. Los azulejos son
baldosas cerámicas ...