Listar ESID_Articles por título
-
Características formales de las iglesias de salón valencianas del s. XVIII
Universidad Politécnica de Valencia (2017)The hall church is a type of religious building, examples of which are found in certain areas of Europe and America. However, there are only few and simple definitions of them as a concept, consisting mainly of a list ... -
Cascade multi-resonant disturbance observer design. Application to a distillation column
Elsevier (2023-09-19)In this work, we present a novel approach for input disturbance estimation design and implementation for dynamical processes under the influence of unknown disturbances that present a clear periodical behaviour of a known ... -
Characterization of halloysite-water nanofluid for heat transfer applications
Elsevier (2014-07-04)Nanofluids based on water with halloysite (Hal) nanotubes were prepared and characterized in order to evaluate its suitability to be used as a heat transfer fluid. A characterization of the Hal powder nanoparticles was ... -
Characterization of Limit Cycle Oscillations Induced by Fixed Threshold Samplers
IEEE (2022-06-13)In this work, a generalized study of the conditions for the appearance of limit cycle oscillations induced by any kind of sampler with multilevel fixed thresholds is presented. These kinds of samplers, which will be referred ... -
Characterization of magnesium doped sol-gel biomaterial for bone tissue regeneration: The effect of Mg ion in protein adsorption
Elsevier (2021-06-01)Magnesium is the fourth most abundant element in the human body with a wide battery of functions in the maintenance of normal cell homeostasis. In the bone, this element incorporates in the hydroxyapatite structure and it ... -
Characterization of polyhydroxyalkanoate blends incorporating unpurified biosustainably produced poly(3-hydroxybutyrate-co-3- hydroxyvalerate)
© 2015 Wiley Periodicals, Inc. (2015-07)ly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed bacterial cultures derived from a cheese whey (CW) industrial by-product (unpurified PHBV; u-PHBV) was incorporated into commercial PHBV without previous ... -
Characterization of serum proteins attached to distinct sol–gel hybrid surfaces
Wiley (2017-07)The success of a dental implant depends on its osseointegration, an important feature of the implant biocompatibility. In this study, two distinct sol–gel hybrid coating formulations [50% methyltrimethoxysilane: 50% ... -
Characterization of the morphology and thermal properties of Zein Prolamine nanostructures obtained by electrospinning
Elsevier (2008)Zein is a "yellowish" colored maize storage prolamine that shows great interest in a number of industrial applications such as food, food coating and food packaging. Nanofibers generated by electrospinning from solution ... -
Characterization of thermal contacts between heat exchangers and a thermoelectric module by impedance spectroscopy
Elsevier (2019)Heat to electricity energy conversion efficiency of a thermoelectric (TE) device is not only influenced by the TE materials properties, but it also depends on the temperature difference between both sides of the TE legs. ... -
Characterization and control of dimensionally similar systems
Elsevier (2011)When a model (i.e. experimental facility) and prototype (i.e. the real system) are dimensionally similar, then it is possible to extrapolate experimental results from model to prototype. In particular, in this article we ... -
La ciudad como interfaz : creación artística, esfera pública y tecnologías de la comunicación
Société des Hispanistes Français (2019)A partir de la aproximación de la concepción de ciudad como una interfaz, en este artículo presentamos algunas investigaciones que hemos realizado durante la primera década de este siglo con el objetivo de analizar las ... -
Closed-form estimates of the domain of attraction for nonlinear systems via fuzzy-polynomial models
Institute of Electrical and Electronics Engineers (IEEE) (2014-04)In this work, the domain of attraction of the origin of a nonlinear system is estimated in closed-form via level sets with polynomial boundary, iteratively computed. In particular, the domain of attraction is expanded ... -
Co-design of H∞ jump observers for event-based measurements over networks
Taylor & Francis (2015-07-27)This work presents a strategy to minimise the network usage and the energy consumption of wireless battery-powered sensors in the observer problem over networks. The sensor nodes implement a periodic send-on-delta approach, ... -
Co-design of jump estimators and transmission policies for wireless multi-hop networks with fading channels
Elsevier (2017)We study transmission power budget minimization of battery-powered nodes in a remote state estimation problem over multi-hop wireless networks. Communication links between nodes are subject to fading, thereby generating ... -
Combinación de tecnologías en el levantamiento de planos. La iglesia parroquial de Portell
Asociación de profesores de expresión gráfica aplicada a la edificación (APEGA) (2015)La sucesiva aplicación de las nuevas tecnologías a la expresión gráfica arquitectónica ha supuesto una revolución en cada uno de los pasos que dan como resultado el levantamiento de planos. En general se puede decir ... -
Comparative study of nanocomposites of polyolefin compatibilizers containing kaolinite and montmorillonite organoclays
Wiley (2010-02)This work studied the morphology and physical properties of nanocomposites of different ethylene copolymers and functionalized polyethylenes with two different types of organoclays, to assess the potential application of ... -
Comparison of patient-centered outcomes measures between low-speed drilling without irrigation and high-speed drilling with irrigation: A randomized clinical trial
Wiley (2023-10-06)Objective To compare patient satisfaction during surgery, postoperative pain and inflammation and quality of life between high-speed drilling with irrigation and low-speed drilling without irrigation for implant bed ... -
Compatibilization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)– poly(lactic acid) blends with diisocyanates
Wiley (2017-02)Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was blended with poly(lactic acid) (PLA) with various reactive processing agents to decrease its brittleness and enhance its processability. Three diisocyanates, namely, ... -
Complement proteins regulating macrophage polarisation on biomaterials
Elsevier (2019-09-01)One of the events occurring when a biomaterial is implanted in an host is the protein deposition onto its surface, which might regulate cell responses. When a biomaterial displays a compromised biocompatibility, distinct ... -
Complete Characterization of Thermoelectric Materials by Impedance Spectroscopy
American Chemical Society (2019-05-01)Thermoelectric materials can directly convert waste heat into electricity. Because of the vast amount of energy available as waste heat in our society, these materials could contribute to reduce our dependence on fossil ...