Listar EMC_Articles por título
-
Silicone elastomers filled with rare earth oxides
IOP Publishing Ltd (2020)Silicones which possess, amongst others, remarkable mechanical properties, thermal stability over a wide range of temperatures and processability, and rare earth oxides(REO), known for their unique optic, magnetic and ... -
Simplified proposal for the temperature field of steel-reinforced CFST columns exposed to fire
Elsevier (2022-10-26)Concrete-filled steel tubular (CFST) columns are composite sections that may contribute to reduce the environmental impact in construction through a more efficient use of resources. By embedding a steel profile inside a ... -
Simulation of bubbly flow in vertical pipes by coupling Lagrangian and Eulerian models with 3D random walks models: Validation with experimental data using multi-sensor conductivity probes and Laser Doppler Anemometry
Elsevier (2012)A set of two phase flow experiments for different conditions ranging from bubbly flow to cap/slug flow have been performed under isothermal concurrent upward air-water flow conditions in a vertical column of 3 m height. ... -
Simulation of the behavior of a refuse landfill on a laboratory scale
Elsevier (2017-12)The characteristics and properties of waste in a landfill, and its evolution over time, are difficult to estimate because of the heterogeneity of materials, biomass degradation, density, cover material, and infiltration ... -
Single droplet drying of detergents: Experimentation and modelling
Elsevier (2021-03-03)This study evaluates the single droplet drying (SDD) of detergents. Experimental data are used to validate a theoretical multistage model. The experiments are carried out in an acoustic levitator analysing six different ... -
Situación Actual de la Reconstrucción 3D de Dibujos Lineales
Centro de Informacion Tecnologica (2004)The present study summarizes the studies made on the three-dimensional reconstruction of linear drawings over the last thirty years, making a critical evaluation of different methods and current tendencies. A new general ... -
Sketch-Based Modeling in Mechanical Engineering Design: Current Status and Opportunities
Elsevier (2022-05-08)Sketch-Based Modeling (SBM) is a field of study that focuses on the automatic creation of 3D models from freehand drawings. Today, two related branches coexist: one aimed at facilitating input for 3D content creation, and ... -
Slender double-tube ultra-high strength concrete-filled tubular columns under ambient temperature and fire
Elsevier (2015)This paper presents the results of an experimental campaign where both the room temperature and the fire resistance of six double-tube concrete filled steel tubular slender columns with different combinations of concrete ... -
SLOD-BI: An Open Data Infrastructure for Enabling Social Business Intelligence
IGI Global (2015)The tremendous popularity of web-based social media is attracting the attention of the industry to take profit from the massive availability of sentiment data, which is considered of a high value for Business Intelligence ... -
Small capacity absorption systems for cooling and power with a scroll expander and ammonia based working fluids
Elsevier (2014-11)Up to now, the use of ammonia/water absorption cycles has been mainly limited to the production of refrigeration or air conditioning but due to the relatively high generator pressure some authors have proposed the integration ... -
Soil–structure interaction effects on the resonant response of railway bridges under high-speed traffic
Taylor & Francis (2015-08)In the present contribution, the dynamic behaviour of beams traversed by moving loads including soil–structure interaction (SSI) is investigated. The main application of the study is to analyse the effects of SSI on the ... -
Special Issue of the 1st International Conference on Nanofluids (ICNf19). Editorial
MDPI (2020)This editorial note is dedicated to the 1st International Conference on Nanofluids (ICNf19), which was organized under the auspices of Nanouptake COST Action in June 2019, in Castelló (Spain). After a brief report about ... -
Stabilization and characterization of a nanofluid based on a eutectic mixture of diphenyl and diphenyl oxide and carbon nanoparticles under high temperature conditions
Elsevier (2017-06)(C12H10O), and it is used as an HTF with a maximum working temperature of 400 °C. However, one of the drawbacks of Therminol VP1 is its low thermal conductivity. In recent years it has been demonstrated that the addition ... -
Stiffness map of the grasping contact areas of the human hand
Elsevier B.V. (2013)The elasticity and damping of the soft tissues of the hand contribute to dexterity while grasping and also help to stabilise the objects in manipulation tasks. Although some previous works have studied the force-displacement ... -
Structural response of concrete-filled round-ended stub columns subjected to eccentric loads
Elsevier (2019-04-01)Concrete-filled steel beam-columns Round-ended beam-columns Eccentric loads High strength concrete Sectional capacity Stub beam-columns -
Study of hysteretic thermoelectric behavior in photovoltaic materials using the finite element method, extended thermodynamics and inverse problems
Elsevier (2013)The main objective of the present work is to develop and prove a theoretical explanation based on the Extended Non-Equilibrium Thermodynamics (ENETs) for the hysteretical thermoelectric behavior observed in certain thin-film ... -
Study of the drying behavior of high load multiphase droplets in an acoustic levitator at high temperature conditions
Elsevier (2011-06-15)Experimental data on the drying behavior of suspension droplets is limited, despite its importance in industrial applications for material processing, chemical or the food industry involving spray dryers. This fact is ... -
Study of the effect of viscosity on the head and flow rate degradation in different multistage electric submersible pumps using dimensional analysis
Elsevier (2017-06)Multistage Electrical Submersible Pumps (ESPs) undergo performance degradation when operating with highly viscous fluids. Several studies on this subject seek to provide models to predict the pump performance under such ... -
Studying kinematic linkage of finger joints: estimation of kinematics of distal interphalangeal joints during manipulation
PeerJ (2022-10-04)The recording of hand kinematics during product manipulation is challenging, and certain degrees of freedom such as distal interphalangeal (DIP) joints are difficult to record owing to limitations of the motion capture ... -
Subcooling methods for CO 2 refrigeration cycles: A review
Elsevier (2018-09)CO2 subcooling has resulted a method to upgrade the performance of CO2 refrigeration plants in the recent years, with overall improvements up to 12% with internal heat exchangers, 22% with economizers, 25.6% with thermoelectric ...