Tribological Analysis and Operation Issues of SiO2 Nanolubricants for MQL Machining Operations
Impacto
![Google Scholar](/xmlui/themes/Mirage2/images/uji/logo_google.png)
![Microsoft Academico](/xmlui/themes/Mirage2/images/uji/logo_microsoft.png)
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7035
comunitat-uji-handle3:10234/8617
comunitat-uji-handle4:
INVESTIGACIONEste recurso está restringido
https://doi.org/10.4028/p-Tu1Cg9 |
Metadatos
Título
Tribological Analysis and Operation Issues of SiO2 Nanolubricants for MQL Machining OperationsFecha de publicación
2023-10Editor
Trans Tech PublicationsCita bibliográfica
Mondragón, Rosa, et al. “Tribological Analysis and Operation Issues of SiO<Sub>2</Sub> Nanolubricants for MQL Machining Operations.” Key Engineering Materials, vol. 960, Trans Tech Publications, Ltd., 10 Oct. 2023, pp. 11–20. Crossref, doi:10.4028/p-tu1cg9.Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://www.scientific.net/KEM.960.11Versión
info:eu-repo/semantics/publishedVersionPalabras clave / Materias
Resumen
Minimum Quantity Lubrication (MQL) has been proved to be an efficient lubricant technique in machining that increases tool life, improves surface roughness, facilitates the recycling of the resulting chips, brings ... [+]
Minimum Quantity Lubrication (MQL) has been proved to be an efficient lubricant technique in machining that increases tool life, improves surface roughness, facilitates the recycling of the resulting chips, brings more sustainable practices in terms of minimum use of lubricants, and reduces the operators’ exposures to toxic particles with respect to conventional cooling practices. In order to increase the performance of MQL, nanoparticles of Al2O3, MoS2, SiO2 graphite and graphene among others have been recently introduced into MQL lubricants. This new approach, called nanoMinimum Quantity Lubrication (NMQL), has been proved to provide better thermal conductivity and lower friction coefficients during cutting, which in turns means higher cutting tool life and lower cutting forces. In this paper, a stable SiO2 -based nanolubricant was produced and characterized. A tribological analysis was conducted on SiO2 nanolubricants to be used on MQL operations. Operational issues related to particles deposition along time, loss of nanolubricant properties when it comes from the MQL system and mist generation were also analyzed. [-]
Publicado en
Key Engineering Materials, 2023Derechos de acceso
© 2023 Trans Tech Publications Ltd, Switzerland
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/restrictedAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/restrictedAccess
Aparece en las colecciones
- ESID_Articles [480]
- EMC_Articles [828]