Study of additive manufacturing techniques to obtain tactile graphics
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V.; Lázaro, R.
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7034
comunitat-uji-handle3:10234/67820
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Study of additive manufacturing techniques to obtain tactile graphicsFecha de publicación
2021Editor
IOP PublishingCita bibliográfica
SERRANO, J., et al. Study of additive manufacturing techniques to obtain tactile graphics. En IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2021. p. 012117.Tipo de documento
info:eu-repo/semantics/conferenceObjectVersión
info:eu-repo/semantics/publishedVersionPalabras clave / Materias
Resumen
Tactile graphics (TG) are intended to facilitate communication for people with total or partial visual impairment. For this purpose, TG include elements in relief that can be perceived through the sense of touch. TG ... [+]
Tactile graphics (TG) are intended to facilitate communication for people with total or partial visual impairment. For this purpose, TG include elements in relief that can be perceived through the sense of touch. TG can be fixed or portable. Fixed TG are expensive, as they are typically produced in very short runs, mostly single part production. Portable TG can be made by thermoforming polymer sheets, but a mould is still required, even though production runs are short (some tens). For this reason, the use of Rapid Manufacturing (RM) and Rapid Tooling (RT) strategies to manufacture TG can be of great interest. In this work, a literature review to study the application of Additive Manufacturing (AM) to obtain TG, both as RM and RT, is carried out. The review reveals the suitability of AM techniques to manufacture TG. In addition, some AM techniques are analysed to be used for a new type of TG, which is based on the deposition of glaze on ceramic tiles. [-]
Descripción
Ponència presentada a la 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain
Publicado en
IOP Conference Series: Materials Science and Engineering, Volume 1193, 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, SpainEntidad financiadora
Generalitat Valenciana
Código del proyecto o subvención
GV/2019/094
Derechos de acceso
info:eu-repo/semantics/openAccess