Study of additive manufacturing techniques to obtain tactile graphics
Visualitza/
Impacte
Scholar |
Altres documents de l'autoria: Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V.; Lázaro, R.
Metadades
Mostra el registre complet de l'elementcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7034
comunitat-uji-handle3:10234/67820
comunitat-uji-handle4:
INVESTIGACIONMetadades
Títol
Study of additive manufacturing techniques to obtain tactile graphicsData de publicació
2021Editor
IOP PublishingCita bibliogràfica
SERRANO, J., et al. Study of additive manufacturing techniques to obtain tactile graphics. En IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2021. p. 012117.Tipus de document
info:eu-repo/semantics/conferenceObjectVersió
info:eu-repo/semantics/publishedVersionParaules clau / Matèries
Resum
Tactile graphics (TG) are intended to facilitate communication for people with total or partial visual impairment. For this purpose, TG include elements in relief that can be perceived through the sense of touch. TG ... [+]
Tactile graphics (TG) are intended to facilitate communication for people with total or partial visual impairment. For this purpose, TG include elements in relief that can be perceived through the sense of touch. TG can be fixed or portable. Fixed TG are expensive, as they are typically produced in very short runs, mostly single part production. Portable TG can be made by thermoforming polymer sheets, but a mould is still required, even though production runs are short (some tens). For this reason, the use of Rapid Manufacturing (RM) and Rapid Tooling (RT) strategies to manufacture TG can be of great interest. In this work, a literature review to study the application of Additive Manufacturing (AM) to obtain TG, both as RM and RT, is carried out. The review reveals the suitability of AM techniques to manufacture TG. In addition, some AM techniques are analysed to be used for a new type of TG, which is based on the deposition of glaze on ceramic tiles. [-]
Descripció
Ponència presentada a la 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain
Publicat a
IOP Conference Series: Materials Science and Engineering, Volume 1193, 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, SpainEntitat finançadora
Generalitat Valenciana
Codi del projecte o subvenció
GV/2019/094
Drets d'accés
info:eu-repo/semantics/openAccess