Morphological Characterization of Indoor Airborne Particles in Seven Primary Schools
![Thumbnail](/xmlui/bitstream/handle/10234/190706/trinidad_2020_morpho.pdf.jpg?sequence=5&isAllowed=y)
View/ Open
Impact
![Google Scholar](/xmlui/themes/Mirage2/images/uji/logo_google.png)
![Microsoft Academico](/xmlui/themes/Mirage2/images/uji/logo_microsoft.png)
Metadata
Show full item recordcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/2508
comunitat-uji-handle3:10234/6999
comunitat-uji-handle4:
INVESTIGACIONMetadata
Title
Morphological Characterization of Indoor Airborne Particles in Seven Primary SchoolsDate
2020-05-03Publisher
MDPIBibliographic citation
Pallarés, S.; Gómez, E.T.; Martínez, Á.; Miguel Jordán, M. Morphological Characterization of Indoor Airborne Particles in Seven Primary Schools. Int. J. Environ. Res. Public Health 2020, 17, 3183.Type
info:eu-repo/semantics/articlePublisher version
https://www.mdpi.com/1660-4601/17/9/3183Version
info:eu-repo/semantics/publishedVersionSubject
Abstract
This paper focuses on a study of fine (less than 2.5 µm) airborne particles collected inside seven primary schools located on a coastal Mediterranean area which has a significant industrial hub for the processing of ... [+]
This paper focuses on a study of fine (less than 2.5 µm) airborne particles collected inside seven primary schools located on a coastal Mediterranean area which has a significant industrial hub for the processing of clays and other minerals as raw materials. Of the seven schools, three are located in an urban area 20 km away from the main industrial hub, three are in a town located next to the industrial estate, and one is in a rural location, 30 km from the industrial area. The objective of this study is to identify the main types of particles found in the three examined environments. The particle matter identified in the fine particle samples is grouped into three main groups: mineral compounds, particles from combustion processes and phases emitted in high-temperature industrial processes. The mineral particles, which can come from natural or anthropogenic emissions, have been classified depending on their morphology as isometric allotriomorphs or subidiomorphs, with a tabular habit; acicular forms; or pure crystalline forms. Compounds from combustion processes have two types of morphologies: spheroid and dendritic soot particles. Additionally, in smaller quantities, spherical particles associated with high-temperature industrial processes, such as the emissions of ceramic tile-firing and frit-melting processes, are identified. A summary table is shown, which lists the characteristics, as well as the most significant origin of the main particles identified in the fine (<2.5 μm) airborne particles collected inside primary schools located in three different environments (urban, industrial and rural). A visual scale has been established based on the number of particles observed in the samples of the atmospheric particulate fraction between the sizes of 2.5 and 10 µm collected inside the schools. The ratios Ca/Si, S/Si, S/Ca and (Si+Ca)/S have been established. Results obtained may be useful in epidemiological studies in the ceramic cluster area in order to estimate children’s exposure to different indoor primary school microenvironments. Effective policies and mitigation measurements for the protection of children’s health should be carried out in this highly industrialized area. [-]
Is part of
Int. J. Environ. Res. Public Health 2020, 17(9), 3183Investigation project
P1·1B2005-18Rights
© 2020 by the authors. Licensee MDPI, Basel, Switzerland.
info:eu-repo/semantics/openAccess
info:eu-repo/semantics/openAccess
This item appears in the folowing collection(s)
- CAMN_Articles [568]
The following license files are associated with this item:
Except where otherwise noted, this item's license is described as © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
Related items
Showing items related by title, author, creator and subject.
-
Determinants of workplace exposure and release of ultrafine particles during atmospheric plasma spraying in the ceramic industry
Viana, Marcelo; Fonseca, A.S.; Querol, Xavier; López Lilao, Ana; Carpio Cobo, Pablo; Salmatonidis, Apostolos; Monfort, Eliseo Elsevier (2017)Atmospheric plasma spraying (APS) is a frequently used technique to produce enhanced-property coatings for different materials in the ceramic industry. This work aimed to characterise and quantify the impact of APS on ... -
Aqueous suspension processing of multicomponent submicronic Y-TZP/Al2O3/SiC particles for suspension plasma spraying
Carnicer Cervera, Víctor; Alzazar, C.; Sánchez, E.; Moreno, R. Elsevier (2018-01)In order to obtain thermal barrier coatings by Suspension Plasma Spraying (SPS) process with potential new self-healing ability multicomponent submicronic Y-TZP/Al2O3/SiC suspensions were prepared. For this purpose, ... -
Densification of irregular polydispersed glass particles described as a complex relaxation process
José Luis, Amorós Albaro; Blasco Roca, Encarna; Feliu Mingarro, Carlos; Moreno Berto, Arnaldo Vicente Elsevier (2022)The sintering of compacts of irregular non-crystallising glass particles was studied by isothermal and constantrate heating experiments in a hot stage microscope. The resulting data fitted very well to kinetic equations developed ...