Morphological Characterization of Indoor Airborne Particles in Seven Primary Schools
![Thumbnail](/xmlui/bitstream/handle/10234/190706/trinidad_2020_morpho.pdf.jpg?sequence=5&isAllowed=y)
Visualitza/
Impacte
![Google Scholar](/xmlui/themes/Mirage2/images/uji/logo_google.png)
![Microsoft Academico](/xmlui/themes/Mirage2/images/uji/logo_microsoft.png)
Metadades
Mostra el registre complet de l'elementcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/2508
comunitat-uji-handle3:10234/6999
comunitat-uji-handle4:
INVESTIGACIONMetadades
Títol
Morphological Characterization of Indoor Airborne Particles in Seven Primary SchoolsData de publicació
2020-05-03Editor
MDPICita bibliogràfica
Pallarés, S.; Gómez, E.T.; Martínez, Á.; Miguel Jordán, M. Morphological Characterization of Indoor Airborne Particles in Seven Primary Schools. Int. J. Environ. Res. Public Health 2020, 17, 3183.Tipus de document
info:eu-repo/semantics/articleVersió de l'editorial
https://www.mdpi.com/1660-4601/17/9/3183Versió
info:eu-repo/semantics/publishedVersionParaules clau / Matèries
Resum
This paper focuses on a study of fine (less than 2.5 µm) airborne particles collected inside seven primary schools located on a coastal Mediterranean area which has a significant industrial hub for the processing of ... [+]
This paper focuses on a study of fine (less than 2.5 µm) airborne particles collected inside seven primary schools located on a coastal Mediterranean area which has a significant industrial hub for the processing of clays and other minerals as raw materials. Of the seven schools, three are located in an urban area 20 km away from the main industrial hub, three are in a town located next to the industrial estate, and one is in a rural location, 30 km from the industrial area. The objective of this study is to identify the main types of particles found in the three examined environments. The particle matter identified in the fine particle samples is grouped into three main groups: mineral compounds, particles from combustion processes and phases emitted in high-temperature industrial processes. The mineral particles, which can come from natural or anthropogenic emissions, have been classified depending on their morphology as isometric allotriomorphs or subidiomorphs, with a tabular habit; acicular forms; or pure crystalline forms. Compounds from combustion processes have two types of morphologies: spheroid and dendritic soot particles. Additionally, in smaller quantities, spherical particles associated with high-temperature industrial processes, such as the emissions of ceramic tile-firing and frit-melting processes, are identified. A summary table is shown, which lists the characteristics, as well as the most significant origin of the main particles identified in the fine (<2.5 μm) airborne particles collected inside primary schools located in three different environments (urban, industrial and rural). A visual scale has been established based on the number of particles observed in the samples of the atmospheric particulate fraction between the sizes of 2.5 and 10 µm collected inside the schools. The ratios Ca/Si, S/Si, S/Ca and (Si+Ca)/S have been established. Results obtained may be useful in epidemiological studies in the ceramic cluster area in order to estimate children’s exposure to different indoor primary school microenvironments. Effective policies and mitigation measurements for the protection of children’s health should be carried out in this highly industrialized area. [-]
Publicat a
Int. J. Environ. Res. Public Health 2020, 17(9), 3183Proyecto de investigación
P1·1B2005-18Drets d'accés
© 2020 by the authors. Licensee MDPI, Basel, Switzerland.
info:eu-repo/semantics/openAccess
info:eu-repo/semantics/openAccess
Apareix a les col.leccions
- CAMN_Articles [568]
Els següents fitxers sobre la llicència estan associats a aquest element:
Except where otherwise noted, this item's license is described as © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
Elements relacionats
Mostrant elements relacionats per títol, autoria, creador i matèria.
-
Determinants of workplace exposure and release of ultrafine particles during atmospheric plasma spraying in the ceramic industry
Viana, Marcelo; Fonseca, A.S.; Querol, Xavier; López Lilao, Ana; Carpio Cobo, Pablo; Salmatonidis, Apostolos; Monfort, Eliseo Elsevier (2017)Atmospheric plasma spraying (APS) is a frequently used technique to produce enhanced-property coatings for different materials in the ceramic industry. This work aimed to characterise and quantify the impact of APS on ... -
New coloured coatings to enhance silica sand absorbance for direct particle solar receiver applications
Gimeno Furió, Alexandra; Hernandez, Leonor; Martinez Cuenca, Raul; Mondragon, Rosa; VELA GASULLA, ANTONIO FABIAN; Cabedo, Luis; Barreneche, Camila; Iacob, Mihail Elsevier (2020-06-30)New systems using solid particles for solar energy capturing, heat transfer and thermal energy storage have been proposed and analysed in direct particle solar receivers. In this work, black coloured silica sand was ... -
Aqueous suspension processing of multicomponent submicronic Y-TZP/Al2O3/SiC particles for suspension plasma spraying
Carnicer Cervera, Víctor; Alzazar, C.; Sánchez, E.; Moreno, R. Elsevier (2018-01)In order to obtain thermal barrier coatings by Suspension Plasma Spraying (SPS) process with potential new self-healing ability multicomponent submicronic Y-TZP/Al2O3/SiC suspensions were prepared. For this purpose, ...