Pozzolanic activity of tiles, bricks and ceramic sanitary-ware in ecofriendly Portland blended cements
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Pitarch-Roig, Angel-Miguel; Reig, Lucía; Tomás, A.E.; Forcada, G.; Soriano, L.; Borrachero, Mª Victoria; PAYÁ, JORDI; Monzo Balbuena, Jose Maria
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7035
comunitat-uji-handle3:10234/8617
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Pozzolanic activity of tiles, bricks and ceramic sanitary-ware in ecofriendly Portland blended cementsAutoría
Fecha de publicación
2020-08-26Editor
ElsevierISSN
0959-6526; 0959-6526Cita bibliográfica
PITARCH, A. M., et al. Pozzolanic activity of tiles, bricks and ceramic sanitary-ware in eco-friendly Portland blended cements. Journal of Cleaner Production, vol. 279, p. 123713.Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://www.sciencedirect.com/journal/journal-of-cleaner-production/vol/279/suppl/CVersión
info:eu-repo/semantics/acceptedVersionPalabras clave / Materias
Resumen
Reusing ceramic waste as a pozzolanic admixture may offer environmental benefits as it allows the reduction in the consumption of natural resources and energy, and the reduction of CO2 emissions associated with Portland ... [+]
Reusing ceramic waste as a pozzolanic admixture may offer environmental benefits as it allows the reduction in the consumption of natural resources and energy, and the reduction of CO2 emissions associated with Portland cement (PC) production, while valorising waste materials with a long biodegradation period. This paper assessed the pozzolanic activity of three different ceramic waste types: red clay bricks (RCB), ceramic tiles (TCW) and ceramic sanitary-ware (CSW). After adapting their particle size by crushing and milling, each was used to replace 0 to 50 wt% PC (CEM I 42.5 R type). The milled powders were characterised by laser diffraction, field emission scanning electron microscopy (FESEM), X-ray fluorescence (XRF) and X-ray diffraction (XRD), and consistency and setting time tests were used to investigate the fresh behaviour of the ceramic waste/PC blended pastes. A basic sustainability analysis was performed, and the pozzolanic activity of RCB, TCW and CSW was assessed by compressive strength tests (performed in mortars cured at room temperature from 3 to 365 days) and microstructural analyses (thermogravimetry, XRD and FESEM performed in the pastes cured at 20 °C for 28 and 90 days). The pozzolanic reaction of these waste materials improved with curing time, and all the mortars prepared with up to 25 wt% RCB, TCW or CSW met the mechanical requirements set out for coal fly ashes, whatever the ceramic waste type used. Among them, these results open up the possibility of partially replacing PC with the closest available ceramic waste, which would reduce the CO2 emissions and economic cost deriving from transporting waste. [-]
Publicado en
Journal of Cleaner Production Volume 279, 10 January 2021, 123713Derechos de acceso
© 2020 Elsevier Ltd. All rights reserved.
info:eu-repo/semantics/openAccess
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- EMC_Articles [823]
El ítem tiene asociados los siguientes ficheros de licencia: