Typological Characterisation of Mineral and Combustion Airborne Particles Indoors in Primary Schools
![Thumbnail](/xmlui/bitstream/handle/10234/190093/atmosphere_00209.pdf.jpg?sequence=5&isAllowed=y)
Ver/ Abrir
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/2508
comunitat-uji-handle3:10234/6999
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Typological Characterisation of Mineral and Combustion Airborne Particles Indoors in Primary SchoolsFecha de publicación
2019-04-19Editor
MDPIISSN
2073-4433Cita bibliográfica
Pallarés, S.; Gómez, E.T.; Jordán, M.M. Typological Characterisation of Mineral and Combustion Airborne Particles Indoors in Primary Schools. Atmosphere 2019, 10, 209Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://www.mdpi.com/2073-4433/10/4/209Versión
info:eu-repo/semantics/publishedVersionPalabras clave / Materias
Resumen
This study was carried out using a scanning electron microscope (SEM) analysis of airborne fine particles and indoor samples, obtained in the interiors of seven primary schools located along the Mediterranean coast ... [+]
This study was carried out using a scanning electron microscope (SEM) analysis of airborne fine particles and indoor samples, obtained in the interiors of seven primary schools located along the Mediterranean coast in an area with an important industrial nucleus. The objectives of this study are to create a catalogue that gathers the principle particles found in the three environments examined and to assess the influence of outside sources of particulate matter on particles found indoors. The particles identified in the fine particle samples have been grouped into two main groups: mineral compounds and particles originating from combustion processes. The mineral particles emanating from natural emissions and anthropogenics were classified according to their morphology into: isometric alotriomorphs or subidiomorphs, with tabular, acicular, and pure crystalline forms. The compounds originating from combustion processes present two types of morphology: spheric-like particles and dendritic soot ones. On the other hand, in lesser proportion, spherical particles were also identified as being associated with industrial processes at high temperatures. To conclude a summary table is presented, that gathers the characteristics (morphology, type and size) along with the origins of the principle particles identified in the interior airborne fine particle samples obtained from primary schools located in three different environments. [-]
Publicado en
Atmosphere 2019, vol. 10Proyecto de investigación
University Jaume I "Pla de Promocio de la Investigacio-Fundacio Caixa Castello-Bancaixa": P1.1B2005-18Derechos de acceso
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- CAMN_Articles [567]
El ítem tiene asociados los siguientes ficheros de licencia:
Ítems relacionados
Mostrando ítems relacionados por Título, autoría o Palabra clave.
-
Structure, morphology and photoluminescence emissions of ZnMoO4: RE 3+=Tb3+ - Tm3+ - X Eu3+ (x = 1, 1.5, 2, 2.5 and 3 mol%) particles obtained by the sonochemical method
Lovisa, L. X.; Oliveira, M. C.; Andres, Juan; Gracia, Lourdes; Li, Maximo Siu; Longo, Elson; Tranquilin, R. L.; Paskocimas, C. A.; Bomio, M. R. D.; Motta, F. V. Elsevier (2018-06)ZnMoO4 and ZnMoO4: RE3+ = 1% Tb3+, 1% Tm3+, x Eu3+ (x = 1, 1.5, 2, 2.5 and 3 mol%) particles were prepared by a sonochemical method. The influence of the dopant content on photoluminescent behavior was investigated. The ... -
Microstructure assessment of suspension plasma spraying coatings from multicomponent submicronic Y-TZP/Al2O3/SiC particles
Carnicer Cervera, Víctor; Orts Tarí, María José; Moreno, Rodrigo; Sánchez-Vilches, Enrique Elsevier (2018-08-01)In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of a multicomponent mixture made up of an Y-TZP/Al2O3 matrix with SiC particles. Two suspensions of Y-TZP and Al2O3 with ... -
An estimate of quartz content and particle size in porcelain tiles from young's modulus measurements
Dal Bó, Marcelo; Cantavella Soler, Vicente; Sánchez-Vilches, Enrique; Gilabert Villegas, Francisco A.; Boschi, Anselmo O.; Hotza, Dachamir Elsevier (2017)The influence of quartz particle size, weight content and firing temperature on the Young's modulus of porcelain tiles was studied. To simulate a porcelain tile microstructure, an albite glass matrix with added crystalline ...