Finite element formulation to study thermal stresses in nanoencapsulated phase change materials for energy storage
Visualitza/
Impacte
Scholar |
Altres documents de l'autoria: Forner Escrig, Josep; Palma Guerrero, Roberto; Mondragon, Rosa
Metadades
Mostra el registre complet de l'elementcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7035
comunitat-uji-handle3:10234/8617
comunitat-uji-handle4:
INVESTIGACIONMetadades
Títol
Finite element formulation to study thermal stresses in nanoencapsulated phase change materials for energy storageData de publicació
2020-03-09Editor
Taylor & FrancisCita bibliogràfica
FORNER-ESCRIG, Josep; PALMA, Roberto; MONDRAGÓN, Rosa. Finite element formulation to study thermal stresses in nanoencapsulated phase change materials for energy storage. Journal of Thermal Stresses, 2020, 43, 5:1-20.Tipus de document
info:eu-repo/semantics/articleVersió de l'editorial
https://www.tandfonline.com/doi/abs/10.1080/01495739.2020.1718045Versió
info:eu-repo/semantics/submittedVersionParaules clau / Matèries
Resum
Nanoencapsulated phase change materials (nePCMs) – which are composed of a core with a phase change material and of a shell that envelopes the core – are currently under research for heat storage applications. Mecha ... [+]
Nanoencapsulated phase change materials (nePCMs) – which are composed of a core with a phase change material and of a shell that envelopes the core – are currently under research for heat storage applications. Mechanically, one problem encountered in the synthesis of nePCMs is the failure of the shell due to thermal stresses during heating/cooling cycles. Thus, a compromise between shell and core volumes must be found to guarantee both mechanical reliability and heat storage capacity. At present, this compromise is commonly achieved by trial and error experiments or by using simple analytical solutions. On this ground, the current work presents a thermodynamically consistent and three-dimensional finite element (FE) formulation considering both solid and liquid phases to study thermal stresses in nePCMs. Despite the fact that there are several phase change FE formulations in the literature, the main novelty of the present work is its monolithic coupling – no staggered approaches are required – between thermal and mechanical fields. Then, the FE formulation is implemented in a computational code and it is validated against one-dimensional analytical solutions. Finally, the FE model is used to perform a thermal stress analysis for different nePCM geometries and materials to predict their mechanical failure by using Rankine’s criterion. [-]
Proyecto de investigación
Ministerio de Economıa y Competitividad (MINECO) of Spain (project ENE2016-77694-R) ; Universitat Jaume I (project UJI-B2016-47) ; Ministerio de Ciencia, Innovacion y Universidades of Spain and Fondo Social Europeo (pre-doctoral fellowship Grant Ref. BES-2017-080217 (FPI program)).Drets d'accés
Copyright © 2020 Taylor & Francis
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Apareix a les col.leccions
- EMC_Articles [828]