Buscar
Inkjet technology for ceramic products. Influence of some process variables on ink penetration
(WileyThe American Ceramic Society, 2019-07-27)
Inkjet technology has become very popular in recent years and is nowadays widely used for
decorating ceramic products. This has led to in-depth study of the operating principles and
process variables involved. These ...
Encapsulation Reduces the Deleterious Effects of Salicylic Acid Treatments on Root Growth and Gravitropic Response
(MDPI, 2022-11-14)
The role of salicylic acid (SA) on plant responses to biotic and abiotic stresses is well documented. However, the mechanism by which exogenous SA protects plants and its interactions with other phytohormones remains ...
Influence of microstructure and magnetizing mechanisms on magnetic complex permeability (imaginary part) of a Cu-doped Ni-Zn polycrystalline ferrite
(Elsevier, 2021)
The complex permeability of the Cu-doped Ni–Zn polycrystalline ferrites is strongly dependent on microstructure, particularly on relative density (ϕ) and average grain size (G), as it has been shown in a previous ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
(Elsevier, 2019)
The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ...
Testing the performance of one and two box models as tools for risk assessment of particle exposure during packing of inorganic fertilizer
(Elsevier, 2019)
Modelling of particle exposure is a useful tool for preliminary exposure assessment in
workplaces. However, actual exposure measurements are needed to assess models
reliability. Worker exposure was monitored during packing ...
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
(Elsevier, 2018-12-20)
The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ...
Non-isothermal sintering of powdered vitrified composites. A kinetic model
(Elsevier, 2019)
This report sets out the results obtained on studying the sintering process of glass–zircon composites,
analysing the microstructural changes that developed on modifying zircon content. The sintering of composites with ...
Beyond the energy balance: Exergy analysis of an industrial roller kiln firing porcelain tiles
(Elsevier, 2019-03)
The ceramic tile manufacturing process consumes large amounts of energy, mainly in the firing stage. Firing usually takes place in natural gas-fuelled continuous roller kilns, the most widely used tile firing facilities ...
Low-cost ceramic membranes: A research opportunity for industrial application
(Elsevier, 2019-03)
Obtaining low-cost ceramic membranes has attracted great interest in the scientific community in last years, as it allows to preserve the advantages of ceramic materials while significantly reduce their manufacturing costs. ...