Buscar
CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes
(American Ceramic Society, 2018-12)
Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants ...
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
(Elsevier, 2018-12-20)
The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Workplace Exposure to Nanoparticles during Thermal Spraying of Ceramic Coatings
(Oxford University Press (OUP), 2019-01)
Thermal spraying is widely used for industrial-scale application of ceramic coatings onto metallic surfaces. The particular process has implications for occupational health, as the high energy process generates high emissions ...
Testing the performance of one and two box models as tools for risk assessment of particle exposure during packing of inorganic fertilizer
(Elsevier, 2019)
Modelling of particle exposure is a useful tool for preliminary exposure assessment in
workplaces. However, actual exposure measurements are needed to assess models
reliability. Worker exposure was monitored during packing ...
Sintered microstructure effect on RF-wave shielding properties of a Cu-doped Ni–Zn-polycrystalline ferrite
(Elsevier, 2021)
The shielding properties of a Cu-doped Ni–Zn polycrystalline ferrite in the frequency range 1 MHz to 1 GHz were explored. Samples of composition (Cu0.12Ni0.23Zn0.65)Fe2O4 were prepared by the traditional ceramic route. The ...
Influence of microstructure and magnetizing mechanisms on magnetic complex permeability (imaginary part) of a Cu-doped Ni-Zn polycrystalline ferrite
(Elsevier, 2021)
The complex permeability of the Cu-doped Ni–Zn polycrystalline ferrites is strongly dependent on microstructure, particularly on relative density (ϕ) and average grain size (G), as it has been shown in a previous ...
Effectiveness of nanoparticle exposure mitigation measures in industrial settings
(Elsevier, 2019-07)
Inhalation of airborne nanoparticles is a well-known source of potentially health-hazardous occupational exposures. Effective mitigation measures are necessary to reduce exposure, but also challenging to implement due to ...
Revisiting pyroplastic deformation. Application for porcelain stoneware tile bodies
(Elsevier, 2018-09-21)
In this research an analysis of firing deformation tendency in porcelain stoneware tile compositions was carried out based on pyroplastic deformation measurements. The effect of the amount and nature of some fluxing additives ...
Beyond the energy balance: Exergy analysis of an industrial roller kiln firing porcelain tiles
(Elsevier, 2019-03)
The ceramic tile manufacturing process consumes large amounts of energy, mainly in the firing stage. Firing usually takes place in natural gas-fuelled continuous roller kilns, the most widely used tile firing facilities ...