Buscar
Sintered microstructure effect on RF-wave shielding properties of a Cu-doped Ni–Zn-polycrystalline ferrite
(Elsevier, 2021)
The shielding properties of a Cu-doped Ni–Zn polycrystalline ferrite in the frequency range 1 MHz to 1 GHz were explored. Samples of composition (Cu0.12Ni0.23Zn0.65)Fe2O4 were prepared by the traditional ceramic route. The ...
Workplace Exposure to Nanoparticles during Thermal Spraying of Ceramic Coatings
(Oxford University Press (OUP), 2019-01)
Thermal spraying is widely used for industrial-scale application of ceramic coatings onto metallic surfaces. The particular process has implications for occupational health, as the high energy process generates high emissions ...
Testing the performance of one and two box models as tools for risk assessment of particle exposure during packing of inorganic fertilizer
(Elsevier, 2019)
Modelling of particle exposure is a useful tool for preliminary exposure assessment in
workplaces. However, actual exposure measurements are needed to assess models
reliability. Worker exposure was monitored during packing ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Beyond the energy balance: Exergy analysis of an industrial roller kiln firing porcelain tiles
(Elsevier, 2019-03)
The ceramic tile manufacturing process consumes large amounts of energy, mainly in the firing stage. Firing usually takes place in natural gas-fuelled continuous roller kilns, the most widely used tile firing facilities ...
Environmental profile of Spanish porcelain stoneware tiles
(Springer, 2018-08)
Purpose
Porcelain stoneware tile (PST) iscurrently the ceram-
ic tile of greatest commercial and innovation interest. An envi-
ronmental life cycle assessment of different varieties of PST
was undertaken to enable ...
Effect of fructose-containing feedstocks on the microstructure of multicomponent coatings deposited by suspension plasma spraying
(Elsevier, 2019-04)
This work addressed to investigate the use of fructose as an additive in the water-based suspension feedstock of a Y-TZP/Al2O3/SiC multicomponent coating manufactured by suspension plasma spraying. The effect of fructose ...
Influence of microstructure and magnetizing mechanisms on magnetic complex permeability (imaginary part) of a Cu-doped Ni-Zn polycrystalline ferrite
(Elsevier, 2021)
The complex permeability of the Cu-doped Ni–Zn polycrystalline ferrites is strongly dependent on microstructure, particularly on relative density (ϕ) and average grain size (G), as it has been shown in a previous ...
Microstructural and in vitro characterisation of 45S5 bioactive glass coatings deposited by Solution Precursor Plasma Spraying (SPPS)
(Elsevier, 2018-12-20)
The present work focused on the development of bioactive glass coatings employing Solution Precursor Plasma Spraying. Precursors of SiO2, CaO, Na2O and P2O5 were mixed in distilled water to prepare concentrated solutions ...
Inkjet technology for ceramic products. Influence of some process variables on ink penetration
(WileyThe American Ceramic Society, 2019-07-27)
Inkjet technology has become very popular in recent years and is nowadays widely used for
decorating ceramic products. This has led to in-depth study of the operating principles and
process variables involved. These ...