Buscar
Effect of fructose-containing feedstocks on the microstructure of multicomponent coatings deposited by suspension plasma spraying
(Elsevier, 2019-04)
This work addressed to investigate the use of fructose as an additive in the water-based suspension feedstock of a Y-TZP/Al2O3/SiC multicomponent coating manufactured by suspension plasma spraying. The effect of fructose ...
Assessment of humidity self-regulation functionality for ceramic tiles
(ElsevierEuropean Ceramic Society, 2021-11-16)
The development of ceramic tiles with humidity regulating capacity is a topic of great interest for the comfort of interior spaces. The humidity regulating capacity of fired specimens from five compositions used for porous ...
Modelización de la sorción en baldosas Cerámicas reguladoras de la humedad ambiental
(Universitat Jaume I, 2023-09-13)
El desarrollo de viviendas confortables con menor consumo energético implica un aumento del aislamiento
térmico y una reducción en la ventilación de los espacios interiores, lo que puede dar lugar a ambientes con
condiciones ...
Low-cost ceramic membranes: A research opportunity for industrial application
(Elsevier, 2019-03)
Obtaining low-cost ceramic membranes has attracted great interest in the scientific community in last years, as it allows to preserve the advantages of ceramic materials while significantly reduce their manufacturing costs. ...
Residual stresses in porcelain tiles. Measurement and process variables assessment
(Elsevier, 2019-04-22)
This research addresses the residual stresses phenomenon taking place during the manufacture of porcelain tiles. Residual stresses were quantified by the strain relaxation slotting method. The method is based on the fact ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
(Elsevier, 2019)
The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ...
Revisiting pyroplastic deformation. Application for porcelain stoneware tile bodies
(Elsevier, 2018-09-21)
In this research an analysis of firing deformation tendency in porcelain stoneware tile compositions was carried out based on pyroplastic deformation measurements. The effect of the amount and nature of some fluxing additives ...
Quartz particle size and cooling rate effects on microstructural defects and mechanical properties of feldspar-based ceramic materials
(Elsevier, 2023-07-14)
Reinforcement or microstructural damage? What effect do quartz particles have on a feldspar-based ceramic material? To answer this question, this study investigates the impact of different cooling conditions on the generation ...
Low-cost ceramic membrane bioreactor: Effect of backwashing, relaxation and aeration on fouling. Protozoa and bacteria removal
(Elsevier, 2022-07-04)
Membrane biological reactors (MBR) constitute an alternative to conventional wastewater treatments for improved recovery, reuse, and recycling of water. MBRs have a smaller footprint, provide better biotreatment and achieve ...