Listar Institut Universitari de Tecnologia Ceràmica "Agustín Escardino" (ITC) por autoría "25adbf94-2162-4f0c-91c7-aa99a27a48a4"
-
Adhesion assessment of bioactive coatings deposited by atmospheric plasma spraying
Akadémiai Kiadó (2017-07-09)The aim of the present work is to prepare bioactive coatings by APS employing different spraying parameters and substrates in order to model the adhesion of the coatings and to determine the best parameters that allow to ... -
Assessment of humidity self-regulation functionality for ceramic tiles
Elsevier (2021-11-16)The development of ceramic tiles with humidity regulating capacity is a topic of great interest for the comfort of interior spaces. The humidity regulating capacity of fired specimens from five compositions used for porous ...
-
Challenging zircon coatings by suspension plasma spraying
Elsevier (2022-04-30)Zircon is a ceramic material that decomposes at high temperature, limiting its use by conventional thermal spraying. In this work, it is intended to use thermal spraying from concentrated aqueous suspensions to evaluate ...
-
Characterization of thermal barriers coatings of Y-TZP/AL2O3/SiC composite obtained by suspension plasma spraying
Akadémiai Kiadó (2017-07-09)The aim of this work is to improve TBCs providing a self-healing ability. For that purpose, an aqueous suspension of SiCY-TZP and Al2O3 was prepared and deposited by suspension plasma spraying to avoid the oxidation of ...
-
Comparison of different silica sources in the development of plasma sprayed 45S5 bioactive glass coatings
Elsevier (2020-06-11)45S5 bioactive glass coatings were deposited by plasma spraying from liquid feedstocks. In these feedstocks, the SiO2 needed to achieve the 45S5 bioactive glass composition has been provided either as tetraethyl orthosilicate ...
-
Compositional effect on humidity self-regulation functionality in gibbsite-based ceramic tiles
Elsevier (2022-08-23)This paper analyses the effect of the starting composition on the humidity regulating capacity of a gibbsite-based composition successfully tested for the manufacture of ceramic tiles. For this purpose, the proportion of ... -
Deposition of bioactive glass coatings based on a novel composition containing strontium and magnesium
Elsevier (2022-05-27)In this work a novel bioactive glass composition was used to deposit coatings by means of plasma spraying. Different coatings were manufactured and optimized by varying the processing parameters and were studied by X-ray ...
-
Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR)
Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-10)The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...
-
Ecological low-cost ceramic membranes based on olive stones as pore former
Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-13)They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes
-
Effect of feedstock and plasma gun on the microstructure and bioactivity of plasma sprayed bioactive glass coatings
Elsevier (2021-01-25)Plasma–sprayed 45S5 bioactive glass coatings were manufactured using two types of powder feedstocks (commercial and lab–made 45S5 glass) and two plasma torches (single and triple cathode) to analyse their influence on ...
-
Effect of firing temperature on humidity self-regulation functionality in a ceramic tile composition
Elsevier (2022-07-19)The effect of sintering temperature on the humidity regulating capacity of a ceramic composition based on the mineral gibbsite has been studied. The humidity self-regulation functionality is due to the presence of mesopores ...
-
Effect of fructose-containing feedstocks on the microstructure of multicomponent coatings deposited by suspension plasma spraying
Elsevier (2019-04)This work addressed to investigate the use of fructose as an additive in the water-based suspension feedstock of a Y-TZP/Al2O3/SiC multicomponent coating manufactured by suspension plasma spraying. The effect of fructose ...
-
Engineering zirconia coating microstructures by using saccharides in aqueous suspension plasma spraying feedstocks
Elsevier (2020-10-15)This study aims to demonstrate the feasibility to develop columnar microstructures in zirconia coatings manufactured by suspension plasma spray, through the modification of the properties of the suspension feedstocks with ...
-
Feasibility of incorporating silica aerogel in atmospheric plasma spraying coatings
Elsevier (2021-06-07)This study aims to demonstrate the feasibility of developing zirconia ceramic coatings with the incorporation of silica aerogel particles, which exhibit outstanding insulating properties. Thus, the research aims to find a ...
-
Industry-scalable wall tile composition based on circular economy
Sociedad Española de Cerámica y Vidrio (2022-08)En el marco de la economía circular y la valorización de residuos, el presente trabajo aborda la posibilidad de fabricar azulejos cuyos soportes incluyan residuos en su formulación. Los residuos seleccionados son tiesto ...
-
Influence of solids concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings
Elsevier (2019)The present research focuses on the effect of feedstock suspension solid concentration on the microstructure of suspension plasma sprayed Y-TZP/Al2O3/SiC composite coatings. For this purpose, concentrated aqueous suspensions ...
-
Ink-jet technology applied to engineer low-cost ceramic membranes
Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-09)This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
-
Low-cost ceramic membrane bioreactor: Effect of backwashing, relaxation and aeration on fouling. Protozoa and bacteria removal
Elsevier (2022-07-04)Membrane biological reactors (MBR) constitute an alternative to conventional wastewater treatments for improved recovery, reuse, and recycling of water. MBRs have a smaller footprint, provide better biotreatment and achieve ...
-
Low-cost ceramic membranes: A research opportunity for industrial application
Elsevier (2019-03)Obtaining low-cost ceramic membranes has attracted great interest in the scientific community in last years, as it allows to preserve the advantages of ceramic materials while significantly reduce their manufacturing costs. ...
-
Mechanical Behavior Monitored by Acoustic Emission of Nanostructured Alumina–Titania Coatings
Springer (2022-10-09)This study aims to evaluate the mechanical behavior of nanostructured and conventional alumina–titania coatings by means of combining four-point bend tests monitored with acoustic emission. Determination of bending strength, ...
