Listar ESID_Congressos i Conferències por autoría "4cefc7d7-39e1-4c5b-9c21-ca52ae4606b3"

Mostrando ítems 1-16 de 16

    • openAccess   Comparative study of Sustainability Metrics for Face Milling AISI 1045 in different Machining Centers 

      AYABACA, CESAR; Abellán-Nebot, José V. Elsevier (2020-03-09)
      The objective of this study is to compare a set of sustainability metrics between different manufacturing resources applied to high performances machining centers. The research compares distributed scenarios in order to ...

    • openAccess   Design of a machine to rectify ceramic tiles for laboratory tests 

      Serrano Mira, Julio; Abellán-Nebot, José V.; Bruscas Bellido, Gracia M. IOP Publishing (2021)
      The tile rectification process, also called squaring, consists of machining the edges of the tile to make them straight, parallel two by two and perpendicular to the other two in addition to controlling the size of the ...

    • openAccess   Development of a modular kit to improve DFA learning 

      Serrano Mira, Julio; Benavent-Nácher, Sergio; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V.; Rosado Castellano, Pedro; Romero Subiron, Fernando (2021-10-25)
      DFA (Design for assembly) is an important part of the contents included in some of the manufacturing courses taught at Jaume I University. DFA is a tool to analyse and improve product design from an assembly point of ...

    • closedAccess   Diagnosis of Students' Mathematical Background to Address Manufacturing Courses 

      Serrano, Julio; Bruscas Bellido, Gracia M.; Benavent-Nácher, Sergio; Rosado-Castellano, Pedro; Abellán-Nebot, José V. Trans Tech Publications (2023)
      In the context of engineering studies, and specifically in courses related to manufacturing processes, student must solve practical problems by applying a high variety of knowledge and skills that should have been acquired ...

    • openAccess   Diseño de un Kit Modular para Mejorar el Aprendizaje de los Conceptos de Diseño para Ensamblaje (DFA) 

      Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V.; Rosado Castellano, Pedro; Romero Subirón, Fernando Universitat Politècnica de València (2019-06-17)
      Students show significant difficulties when having to acquire and take in certain concepts present in some courses in the field of Manufacturing Engineering. Generally, theoretical concepts taught in class are supported ...

    • openAccess   Especificaciones para el diseño de gráficos tangibles cerámicos para uso colectivo e inclusivo 

      Serrano Mira, Julio; Gual, Jaume; Abellán-Nebot, José V.; Bruscas Bellido, Gracia M.; Monferrer Pruñonosa, Marc Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO) (2019-07-10)
      La baldosa cerámica “Kersigns” constituye un nuevo tipo de gráficos tangibles inclusivos orientados a personas con discapacidad visual. Estos gráficos tangibles se obtienen mediante un novedoso sistema de fabricación basado ...

    • openAccess   Estudio de los factores de transmisión de la variabilidad dimensional en la fabricación de baldosas cerámicas 

      Abellán-Nebot, José V.; Vila, Carlos; Bruscas Bellido, Gracia M.; Serrano Mira, Julio Universidad Miguel Hernández de Elche. Grupo de Ingeniería Mecánica Aplicada (AME) (2016)
      Uno de los principales problemas en la fabricación de pavimento en la industria cerámica es la variabilidad dimensional tras la cocción del producto cerámico que ocasiona la clasificación del producto en diferentes ...

    • openAccess   Incorporation of form deviations into the matrix transformation method for tolerance analysis in assemblies 

      Serrano Mira, Julio; Rosado Castellano, Pedro; Romero Subirón, Fernando; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V. Elsevier (2020-03-09)
      Mathematical models for tolerance representation are used to assess how the geometrical variation of a specific component feature propagates along the assembly, so that tolerance analysis in assemblies can be carried out ...

    • openAccess   Influencia de diferentes tipos de lubricación en el acabado superficial en operaciones de fresado de aceros al carbono 

      Ortells Rogero, Miguel; Abellán-Nebot, José V.; Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Vila, Carlos Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO) (2018-07-11)
      In machining processes the use of coolants and lubricants in the cutting zone is critical to reduce cutting forces, facilitate the chip removal and improve the surface quality of the workpiece. However, the influence of ...

    • openAccess   Influencia de la geometría superficial en la calidad del proceso de pulido de baldosas cerámicas porosas esmaltadas 

      Serrano Mira, Julio; Guaita Delgado, Vicente Luis; Abellán-Nebot, José V.; Bruscas Bellido, Gracia M. Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO) (2019-07-10)
      Glazed porous ceramic tiles are used for wall tiling due to their high humidity absorption, which produces deformations in them. These tiles have a good surface appearance due to its glazed layer, and polishing is not ...

    • openAccess   Influencia de los defectos geométricos en la superficie de contacto de un disipador de calor, orientado a la asignación de sus tolerancias de fabricación 

      Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Vila, Carlos; Abellán-Nebot, José V. Universidad Miguel Hernández de Elche. Grupo de Ingeniería Mecánica Aplicada (AME) (2016)
      Las desviaciones de la geometría real en los componentes fabricados respecto de la geometría ideal tratada durante el diseño provocan la aparición de anomalías durante el funcionamiento de componentes ensamblados, siendo ...

    • openAccess   Model-based observer proposal for surface roughness monitoring 

      Moliner-Heredia, Rubén; Abellán-Nebot, José V.; Peñarrocha-Alós, Ignacio Elsevier (2020-03-09)
      In the literature, many different machining monitoring systems for surface roughness and tool condition have been proposed and validated experimentally. However, these approaches commonly require costly equipment and ...

    • openAccess   Obtención de gráficos tangibles cerámicos para uso colectivo e inclusivo 

      Gual, Jaume; Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V.; Guaita Delgado, Vicente Luis Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO) (2018-07-11)
      The proposed work presents a new system for the production of tactile and inclusive graphics, adapted to people with visual impairment, based on the use of materials, techniques and knowledge typical from the ceramic ...

    • openAccess   Project-Based collaborative engineering learning to develop Industry 4.0 skills within a PLM framework 

      Vila, Carlos; Ugarte, D.; Ríos, José; Abellán-Nebot, José V. Elsevier (2017)
      Training and learning methods for engineering students, in the disciplines of product design and manufacturing, are becoming more difficult and complex since they have to integrate theoretical technical knowledge, skills ...

    • openAccess   Study of additive manufacturing techniques to obtain tactile graphics 

      Serrano Mira, Julio; Bruscas Bellido, Gracia M.; Abellán-Nebot, José V.; Lázaro, R. IOP Publishing (2021)
      Tactile graphics (TG) are intended to facilitate communication for people with total or partial visual impairment. For this purpose, TG include elements in relief that can be perceived through the sense of touch. TG can ...

    • openAccess   Variation propagation of bench vises in multi-stage machining processes 

      Abellán-Nebot, José V.; Moliner-Heredia, Rubén; Bruscas Bellido, Gracia M.; Serrano Mira, Julio Elsevier (2019-03-09)
      Variation propagation has been successfully modeled by the Stream of Variation (SoV) approach in multistage machining processes. However, the SoV model basically supports 3-2-1 fixtures based on punctual locators and other ...